Another SR250 - The Police

[Fedja]

jup, spring is installed correctly. plates are not stuck together i took them out and cleaned.
i tried to attach cable to the rod and pull it with hands...it returns normaly. when i try it with lever like it should...it doesnt return. i'm waiting for new cable...we will see.

[interceptor]

Was wondering if you touched or tightened the pivot bolt for the hand lever?  I over tightened mine and it was acting same way.  I loosened it and it works much better now.

[Maritime]

Was wondering if you touched or tightened the pivot bolt for the hand lever?  I over tightened mine and it was acting same way.  I loosened it and it works much better now.

I did this once too.  Check it and see.

[Fedja]

will do that when i get back to garage on weekend.

cheers

[Fedja]

the cable was not the issue, it was the nut...

anyway got new trouble, im in process of rewireing and i have disconected starter relay and now i dont know wich side goes to battery and wich side goes down in crankcase...help

[SteveG]

Do these help:

[Fedja]

I cant tell, it doesnt look the same.
Mine is hitachi ms5d-191
http://img.auctiva.com/imgdata/1/4/5/4/6/0/8/webimg/533386237_o.jpg

[Bert Jan]

Af far ias i know i doesn't matter. The relais (actuator) connects the 2 big contactpoints (m6) when power is applied to the small wires. It doesn't matter wich wire goes where on this particular part. If you're still in doubt you could open it to see what happens when power is applied.

Don't take my words for wisdom, i could be wrong.

[Fedja]

thnx Bert, I figured it out, it doesn't matter wich wire goes where.

cheers

[Fedja]

So yeah I finally finished this
This is what it looks like now;

I'm really unhappy with front end...its fugly as hell :-/ but I had no more resources (cash or time) to make it look nicer. And I just wanted to ride it.