Aluminum Mini Gauge Bracket

[Redline]

Ripple Rock Racing has a new Aluminum Mini Gauge Instrument Bracket brought to you by Bullit Custom Cycles which is designed to fit all Honda SOHC and DOHC models from about 1974-78 that have the stock ignition key mounted to the top triple. This would include the CB750, 650,550 as well as CB450/500T. We designed this bracket to use the 2.25" Mini Gauge products offered by distributors in Canada and in the US.




This bracket allows the use of the stock ignition mount and the stock choke mount with the stock Honda top triple. The warning light box is removed and the stock instruments are replaced with your mini gauges. The mini speedometer would contain the warning light LED unit and the mini tachometer would be the appropriate ratio for the model (CB750/650 4:1,
while CB550 7:1). You would simply unbolt the complete stock unit (2 bolts), unbolt the ignition key mount, unplug the warning light connectors and remove the stock nacelle as a unit. Then re-bolt the ignition key mount with the new instrument bracket mini gauges attached, plug in the connectors for the warning lights and you're up and running!! Simple but elegant. The cables for the speedo and tach don't interfere with the stock headlight yet are nicely spaced for that minimalist cafe racer look.






  We've attached some pics with the gauge unit mounted to a CB550 cafe (key is hidden away elsewhere on this build) in the flesh as well as a few pics of the bracket and ignition key mounted to a CB650 top triple. We can supply the 2.25" instruments as package with the bracket and the gauges.






Aluminum Mini Gauge Bracket                $24.95

[Captmilk76]

Do you have one that will work on an xs650

[lassenc]

I believe the RD350 shares dashboards with the XS650 (60mm. between the mounting holes), would be a wise move. Lots of those around.

Also, I have an RD350

[mnraider]

Those are very nice looking. I would be interested to hear if they fit the XS400 also as the clean look would fit nice with the project I am looking at.

[m33p]

where can i find the riser caps that you guys show in these pictures?

[Redline]

They're the stock ones polished up!