collapse

www.dimecitycycles.com


www.restocycle.com

www.CITYLIMITMOTO.com

www.jadusmotorcycleparts.com

www.bisonmotorsports.com

www.speedmotoco.com

www.cognitomoto.com

www.townmoto.com

www.sparckmoto.com

www.Moto-Madness.com

www.pistonsociety.com

www.steeltowngarage.com


Author Topic: "Woody" a '75 cb750k cafe racer woodgrain paint. Done 4/15!  (Read 48420 times)

Offline FGKouki

  • Posts: 177
Re: "Woody" a '75 cb750k cafe brat
« Reply #60 on: Nov 10, 2012, 23:01:03 »
 ;)  got a bleeder screw off of a late 80s Honda Prelude today at the junkyard.  works just fine now.

Offline juan@crqcycles

  • Posts: 234
  • Not a lot of cafe's down here in Mexico...
    • CRQ Cycles
Re: "Woody" a '75 cb750k cafe brat
« Reply #61 on: Nov 29, 2012, 00:24:56 »
Any updates / pics?

Offline FGKouki

  • Posts: 177
Re: "Woody" a '75 cb750k cafe brat
« Reply #62 on: Nov 29, 2012, 00:45:16 »
Thanks for asking Juan.  I starting making some rearsets and I will fab up the oil sump after that!  I'll post some photos in a couple days. 
« Last Edit: Nov 29, 2012, 00:47:18 by FGKouki »

Offline juan@crqcycles

  • Posts: 234
  • Not a lot of cafe's down here in Mexico...
    • CRQ Cycles
Re: "Woody" a '75 cb750k cafe brat
« Reply #63 on: Nov 29, 2012, 01:54:06 »
Thanks for asking Juan.  I starting making some rearsets and I will fab up the oil sump after that!  I'll post some photos in a couple days.

I'll be waiting! Looking at your 240 I am really waiting for the end result of this bike

Offline FGKouki

  • Posts: 177
Re: "Woody" a '75 cb750k cafe brat
« Reply #64 on: Nov 29, 2012, 02:21:10 »
:D Thanks.   The car's look is very unassuming to most people but very detail heavy with one off bits everywhere.  I hope the bike has that same vibe when I'm done with it. 




Offline juan@crqcycles

  • Posts: 234
  • Not a lot of cafe's down here in Mexico...
    • CRQ Cycles
Re: "Woody" a '75 cb750k cafe brat
« Reply #65 on: Nov 29, 2012, 03:00:25 »
What engine mods are you running?

Offline FGKouki

  • Posts: 177
Re: "Woody" a '75 cb750k cafe brat
« Reply #66 on: Nov 29, 2012, 12:00:58 »
oversized pistons, forged rods, arp main and headstuds, s13 cams, 57trim t4, custom intake plenum,  equal length turbo manifold, 90mm throttle body, and all the supporting stuff. 


Offline juan@crqcycles

  • Posts: 234
  • Not a lot of cafe's down here in Mexico...
    • CRQ Cycles
Re: "Woody" a '75 cb750k cafe brat
« Reply #67 on: Nov 29, 2012, 12:50:26 »
I knew something was going on down there! Thanks!

Offline LtGeorge

  • Posts: 242
Re: "Woody" a '75 cb750k cafe brat
« Reply #68 on: Nov 29, 2012, 15:39:27 »
kouki kinda looks like my old one except I had a bottom mount turbo!! super sweet car

Offline FGKouki

  • Posts: 177
Re: "Woody" a '75 cb750k cafe brat
« Reply #69 on: Nov 29, 2012, 22:42:21 »
Thanks.  Here's where I am with the rearsets.  cut some 1/4" plate out on the bandsaw and put some radii on the edges and some pilot holes for the hardware.  The bmx pegs will make the heel portion (may get smaller pegs) and I have an idea for the front.  Need to make a trip to the hardware store to figure that out and to get some clevis pins or heim joints and threaded rod for linkage.

 
« Last Edit: Nov 29, 2012, 22:46:50 by FGKouki »