collapse

www.dimecitycycles.com


www.restocycle.com

www.CITYLIMITMOTO.com

www.jadusmotorcycleparts.com

www.bisonmotorsports.com

www.speedmotoco.com

www.cognitomoto.com

www.townmoto.com

www.sparckmoto.com

www.Moto-Madness.com

www.pistonsociety.com

GET DTT UPDATES ON FACEBOOK AND TWITTER

Author Topic: 1972 CL350 "Scrambler" project  (Read 9129 times)

Offline ISMarco

  • Posts: 46
Re: 1972 CL350 "Scrambler" project
« Reply #30 on: Nov 19, 2012, 12:28:11 »
It's a Hella 90mm projector, with HID retrofit and custom cutoff shield by FGKouki (He is quite well known for retrofits on hidplanet.com!). The light will be independently mounted from the plate, so that I can aim it properly. It'll probably be mounted to the lower triple clamp with a bracket (Haven't quite decided what to do exactly haha). The plate will be held onto the forks using adjustable threaded hex stock and clamps on the fork tubes.


Offline ISMarco

  • Posts: 46
Re: 1972 CL350 "Scrambler" project
« Reply #31 on: Nov 27, 2012, 01:05:49 »




Finally got the frame back from powdercoating. Pictures are terrible, sorry. I had an accident and smashed one of my fingers pretty bad so the going might be slow. That and I have my senior design project due this week at school.
« Last Edit: Feb 05, 2015, 00:26:41 by ISMarco »

Offline FGKouki

  • Posts: 177
Re: 1972 CL350 "Scrambler" project
« Reply #32 on: Nov 27, 2012, 16:03:56 »
Remind me to bring my camera/flash over next time.   I have a really good idea to mount the headlight/backplate to the forks too. 
« Last Edit: Nov 27, 2012, 16:05:48 by FGKouki »

Offline juan@crqcycles

  • Posts: 234
  • Not a lot of cafe's down here in Mexico...
    • CRQ Cycles
Re: 1972 CL350 "Scrambler" project
« Reply #33 on: Nov 29, 2012, 00:26:19 »


Unloading it after purchase


Hey man; Do you have more pics of your truck? Is it a Datsun?

Offline ISMarco

  • Posts: 46
Re: 1972 CL350 "Scrambler" project
« Reply #34 on: Nov 29, 2012, 03:27:28 »
It's a friend's truck. It's a 90's Nissan Hardbody (I'd love a Datsun 620 though!)

Not many pictures of it exist unfortunately haha. It has 4x4 flares and is lowered on some 5-spoke 15x10 wheels

Offline FGKouki

  • Posts: 177
Re: 1972 CL350 "Scrambler" project
« Reply #35 on: Nov 29, 2012, 12:05:20 »

Offline ISMarco

  • Posts: 46
Re: 1972 CL350 "Scrambler" project
« Reply #36 on: Dec 01, 2012, 01:50:43 »

Lifted this thing in. Frame unscathed!

Coming together a little. One of the turn signals' threads snapped off :(
« Last Edit: Feb 05, 2015, 00:27:14 by ISMarco »

Offline ISMarco

  • Posts: 46
Re: 1972 CL350 "Scrambler" project
« Reply #37 on: Dec 04, 2012, 19:02:54 »






« Last Edit: Feb 05, 2015, 00:27:26 by ISMarco »

Offline BarnBurner

  • Posts: 626
Re: 1972 CL350 "Scrambler" project
« Reply #38 on: Dec 04, 2012, 21:27:26 »
No offense, but that light and plate looks too HUGE on there. I was expecting something a little more form fitting. The battery tray is spot on though!
Old motorcycles never die, they just wait.

1971 Honda CL350
1968 Aermacchi/Harley Davidson Rapido
1967 Ducati Monza Jr. 160
1966 Honda CA100
1965 Honda CL77

Offline Hammina

  • Posts: 14
Re: 1972 CL350 "Scrambler" project
« Reply #39 on: Dec 04, 2012, 22:00:21 »
That's pretty amazing work! What is the name of that plastic material you're using? Sweet battery box and rear end.