MOTOGADGET M-SWITCHES!!!!!!!!!!!!!!!
[/size]
Function
The m-Switch is a stunningly designed universal push button switch for handle bars 1" or 22 mm (7/8") in diameter.
In combination with an electronical control unit such as the m-relay (NOT INCLUDED!) these beautiful housed push buttons can control all electrical devices like headlights/rear lights, flashers, starter engines, horns and much more.
Milled from billet aluminium, the housing is mirror polished or shining black anodised.
Two or more units on the handlebar can easily be combined.
Two push buttens per unit, can be supplied in black or stainless steel fitting or in contrast to the housing.
Two hidden bolts threaded M5 are made of stainless steel and clamp the m-Switch solidly and securely to any handlebar.
The push buttons are of high quality, very sturdy, and vibrations and water proof(IP65).
The big surface and an ergonomical pressure point (a soft, mechanical detent) allowes a secure feedback for the actuation - even with gloves. This feedback is important so the rider is aware of the switch status. This means less checks during riding are necessary.
Each push button has two connectors. So you can use it with a one-wire or two-wire control unit. If you use only one wire the connector for ground is already integrated in the housing. All this enables you to wire all cables inside your handle bar if you like.
Every single push button can be ordered as single unit later on.
The m-Switch is compatible with all available control units on the market.
