collapse

www.dimecitycycles.com

www.cognitomoto.com

https://www.townmoto.com/collections/vanson-leathers

www.speedmotoco.com

www.CITYLIMITMOTO.com

www.jadusmotorcycleparts.com

www.lostapostlejewelry.com

www.sparckmoto.com

www.pistonsociety.com


Author Topic: XT600 cafe before and after  (Read 2404 times)

Offline gsenyk75

  • Posts: 2
XT600 cafe before and after
« on: May 03, 2016, 21:27:53 »
Finally complete after a couple years.

Offline Nj732port

  • Posts: 550
Re: XT600 cafe before and after
« Reply #1 on: May 03, 2016, 21:53:20 »
Looks good thought the duck was sitting on it!!


Offline Winston

  • Posts: 18
Re: XT600 cafe before and after
« Reply #3 on: May 23, 2016, 22:20:01 »
Excellent! Need more pics and info.

Offline gsenyk75

  • Posts: 2
Re: XT600 cafe before and after
« Reply #4 on: Jun 04, 2016, 23:09:55 »
Thanks for the kind words.
I used a TX500 tank and a cafe seat bought off of ebay. The tank and seat were painted a dark blue from a 68 mustang. I also had the painter copy the strip from the gt350 mustang. I installed R1 rearsets and rear master cylinder. I added a rear wheel and caliper from 92 xt600. I had the frame, rims, and hubs powdercoated black. The clipons I found on ebay also. The speedo/tach is a trail tech vapor. The header pipes are from a SRX600 and I added keihin dual 31mm carbs.

Offline julian.allard66

  • Posts: 286
Re: XT600 cafe before and after
« Reply #5 on: Jun 05, 2016, 01:33:37 »
I like that

Offline David_W

  • Posts: 50
Re: XT600 cafe before and after
« Reply #6 on: Jun 05, 2016, 12:51:31 »
Beautiful!


Sent from my iPhone using DO THE TON

Offline Signbike

  • Posts: 5
Re: XT600 cafe before and after
« Reply #7 on: Apr 05, 2018, 17:56:30 »
Nice, good job!


Sent from my iPad using DO THE TON

Offline zap2504

  • Posts: 378
Re: XT600 cafe before and after
« Reply #8 on: Mar 26, 2019, 13:00:29 »
Thanks for the kind words.
I used a TX500 tank and a cafe seat bought off of ebay. The tank and seat were painted a dark blue from a 68 mustang. I also had the painter copy the strip from the gt350 mustang. I installed R1 rearsets and rear master cylinder. I added a rear wheel and caliper from 92 xt600. I had the frame, rims, and hubs powdercoated black. The clipons I found on ebay also. The speedo/tach is a trail tech vapor. The header pipes are from a SRX600 and I added keihin dual 31mm carbs.
Nice work! I assume this is an oil-in-frame XT600. If so, how difficult was it to mount the TX500 tank with the oil return fitting near the mounts? Also, are the Keihin 31mm carbs off a Kaw EX250 or separate?

Offline der_nanno

  • Posts: 529
  • Faster!
    • Greasy Greg
Re: XT600 cafe before and after
« Reply #9 on: Mar 26, 2019, 14:05:34 »
I think someone just went with a smaller oil-tank from a tenere model, as it sits right above the left footrest. Nice work!
Real freedom starts with the freedom of thought.

My Blog:
http://greasygreg.blogspot.co.at

My Mule TR1.1 build here on DTT:
http://www.dotheton.com/forum/index.php?topic=75458.0

My Turbo TR1.1 (XV1000) build here on DTT:
http://www.dotheton.com/forum/index.php?topic=72571

My XS Triple Sidecar build here on DTT:
http://www.dotheton.com/forum/index.php?topic=74211