collapse

www.cognitomoto.com

www.dimecitycycles.com

https://www.townmoto.com/collections/vanson-leathers


www.restocycle.com

www.CITYLIMITMOTO.com

www.jadusmotorcycleparts.com

www.bisonmotorsports.com

www.speedmotoco.com

www.lostapostlejewelry.com

www.sparckmoto.com

www.pistonsociety.com

www.steeltowngarage.com


Author Topic: 1974 CB360 - first bike/build  (Read 14393 times)

Offline JustinLonghorn

  • DTT SUPPORTER
  • *
  • Posts: 6556
  • No Purple Hearts, No Blue Ribbons
Re: 1974 CB360 - first bike/build
« Reply #160 on: Jan 04, 2019, 12:24:22 »
Holy shit! That Lincoln setup is all you will ever need. Congrats again on that, man!

Keep up the good work, the scoot is looking fantastic.
I'm going to eat your brains and gain your knowledge.

Into The Sunset, CB750 build

TT500 the Animal

Offline advCo

  • DTT BOTM WINNER
  • *
  • Posts: 2769
  • Nick Ol' Eye
    • adventur Studios
Re: 1974 CB360 - first bike/build
« Reply #161 on: Jan 04, 2019, 13:10:43 »
That's badass. I haven't been to Handbuilt in a couple years. Are you out of Texas? I'm in Houston.
"He broke the mirrors off his Cadillac, 'cause he doesn't like it looking like he looks back."

74 CB360 - Luna - http://www.dotheton.com/forum/index.php?topic=63294.0 - Sold
82 GS550L - Tracker-ish - http://www.dotheton.com/forum/index.php?topic=67229.0 - Sold
74 XL350 - The Turd - http://www.dotheton.com/forum/index.php?topic=70252.0 - Sold
Suzuki FA50 "No-Ped" - http://www.dotheton.com/forum/index.php?topic=71189.0
73 Suzuki RV125 -http://www.dotheton.com/forum/index.php?topic=73875.0
'97 BMW F650st - http://www.dotheton.com/forum/index.php?topic=75732.0

Offline huck_finn

  • Posts: 173
    • 1974 CB360
Re: 1974 CB360 - first bike/build
« Reply #162 on: Jan 04, 2019, 18:44:52 »
Not in Texas - but only about a 10 hour drive from Austin, been out there a couple of times for SXSW (for work), but never by their shop.

Offline DesmoDog

  • Posts: 260
Re: 1974 CB360 - first bike/build
« Reply #163 on: Jan 05, 2019, 00:54:49 »
Got a new battery from Sparck Moto - the thought was to get one small enough to mount just about anywhere in any orientation. I still wasn't 100% sure on the direction I wanted to head with the bike (still not).



I've only scanned over all the posts here so maybe I missed it, but have you upgraded the voltage regulator? Modern batteries need modern (MOSFET) voltage regulators.

I know EarthX uses some sort of battery protection circuit to protect from over charging, but I also know what an EarthX smells like when it self destructs due to over voltage being fed into it. Once the battery begins to fail, there is nothing you can do to stop it, you just have to stand there, watch the light show, and hope nothing actually starts burning. Stand upwind.

To be fair I have been told (by EarthX) that they have upgraded the over voltage protection since I had my little issue, so I kinda doubt your bike puts out enough voltage to hurt it even unregulated, but better safe than sorry. You do NOT want that thing losing all it's smoke, and trust me, they hold a LOT of smoke. And it smells horrible. The "holy shit I'm pretty sure I shouldn't be inhaling this" sort of horrible smell. Im also guessing the LEDs would appreciate a more modern approach to voltage regulation but I'm no LED expert.

My '91 Ducati 851 now runs a modern voltage regulator and a voltage meter along with it's (replacement) EarthX battery.



So to recap:

If you want to run a modern lithium battery, you should also run a modern regulator. And a voltage meter.

Also just to be clear, I don't blame EarthX for this, Post-meltdown testing showed the voltage regulator was shot. I also lost a circuit in the ECU, plus the headlight and a fuel pump relay failed soon after. Maybe a coincidence, maybe not.
« Last Edit: Jan 05, 2019, 01:00:36 by DesmoDog »

Offline 1fasgsxr

  • Posts: 1604
Re: 1974 CB360 - first bike/build
« Reply #164 on: Jan 05, 2019, 11:02:56 »
I bought this for a 98 Gsxr 750
http://www.dotheton.com/forum/index.php?topic=41083.0

Life is a journey from the maternity ward to the crematorium....

Offline crazypj

  • Posts: 13243
  • Split personality, I fake being smart
Re: 1974 CB360 - first bike/build
« Reply #165 on: Jan 05, 2019, 16:04:02 »
Suzuki R/R are always a suspect component. Even the 2008~2010 are crap and can cause fires with 100% stock set up. (I was teaching 'FAST' at MMI from 2006) plus I worked in Suzuki dealers in 1980's. Some are OK  ('Intruder' where they had to be mounted close to left silencer) but they have always used the cheapest components available. It's kinda like the LUCAS of the Japanese bike industry. Lucas could actually make really good parts, just not at the prices demanded by manufacturers.
'you can take my word for it or argue until you find out I'm right'
Best thing I ever overheard
"yep, PJ's my boss, he taught me everything I know, just didn't teach me everything he knows"
Brian Morgan, 1982

CB360's,  http://www.dotheton.com/forum/index.php?topic=11736.0
XS650,  http://www.dotheton.com/forum/index.php?topic=11922.0

Offline huck_finn

  • Posts: 173
    • 1974 CB360
Re: 1974 CB360 - first bike/build
« Reply #166 on: Jan 17, 2019, 22:39:24 »
I upgraded the reg/rec (got one from Sparck) pretty soon after I started working on it. I also added one of Rick's Electrics stators about a year ago. I ended using their reg/rec combo once I made the swap since it came with the stator.

But as of tonight - my EarthX is dead. After talking with EarthX it sounds like it has a dead cell (won't charge above 11.5ish). Not sure what happened to it - EarthX said that the battery was compatible with Rick's charging system.

Now I am trying to figure out what to do for a new battery without shelling out a lot of cash, since I have get my truck re-painted pretty soon.

Offline cb360j

  • Posts: 139
Re: 1974 CB360 - first bike/build
« Reply #167 on: Jan 18, 2019, 08:06:30 »
They're very cheap, but, powersonic actually has decent batteries. The company I work for purchase from them for something like $3 per battery lol. I have seen some on amazon for $39 or something that would support our bikes. Weird that your EarthX isn't holding up though.

Offline crazypj

  • Posts: 13243
  • Split personality, I fake being smart
Re: 1974 CB360 - first bike/build
« Reply #168 on: Jan 20, 2019, 02:02:55 »
Probably the rejects from Boeing?  ;D
'you can take my word for it or argue until you find out I'm right'
Best thing I ever overheard
"yep, PJ's my boss, he taught me everything I know, just didn't teach me everything he knows"
Brian Morgan, 1982

CB360's,  http://www.dotheton.com/forum/index.php?topic=11736.0
XS650,  http://www.dotheton.com/forum/index.php?topic=11922.0

Offline Odontologist

  • Posts: 112
  • Umina Beach, Australia....Where does that part go?
Re: 1974 CB360 - first bike/build
« Reply #169 on: Jan 20, 2019, 03:17:42 »
An old saying... When I die, I hope my wife doesn't  sell the bikes for what I told her I spent on them.
Run out of zip ties? Dental floss is an excellent alternative.

1982 Honda CX500 Roadster build