collapse

www.dimecitycycles.com

www.cognitomoto.com

https://www.townmoto.com/collections/vanson-leathers

www.speedmotoco.com

www.CITYLIMITMOTO.com

www.jadusmotorcycleparts.com

www.lostapostlejewelry.com

www.sparckmoto.com

www.pistonsociety.com


Author Topic: Cl350 "Scrambler" Exhaust on Cb350 Mounting Issues  (Read 6807 times)

Offline cb360j

  • Posts: 324
Re: Cl350 "Scrambler" Exhaust on Cb350 Mounting Issues
« Reply #10 on: Jan 07, 2019, 11:16:54 »
If you look a little higher in this thread you will see a picture of the diagram for the exhaust assembly. Number 2 (the collars) go around the pipe before the... what I would call a lip on the end of the header before it goes into the head, and then number 1 (the out ring thing) go over the collars holding them in place. then the exhaust slides into the head. Make sure you have the copper crush gasket in between the head and the exhaust pipe as well.

Offline matthew33458

  • Posts: 3
Re: Cl350 "Scrambler" Exhaust on Cb350 Mounting Issues
« Reply #11 on: Jan 08, 2019, 10:00:04 »
Fantastic! Thanks for your help. I'll have another go.
Matthew

Offline matthew33458

  • Posts: 3
Re: Cl350 "Scrambler" Exhaust on Cb350 Mounting Issues
« Reply #12 on: Jan 11, 2019, 15:36:58 »
Hi CB360j, I just wanted to thank you again - exhausts refitted and all working perfectly. Thanks again!
Matthew

Offline MiniatureNinja

  • Posts: 519
Re: Cl350 "Scrambler" Exhaust on Cb350 Mounting Issues
« Reply #13 on: Jan 12, 2019, 01:06:08 »
Yes. All CB350 and CL350 exhaust are generally interchangeable because the heads are the same . If you are running sidecovers, though, you may run into a problem because I believe some CL models had different shaped side covers to avoid touching the hot exhaust pipe and melting. I can't confirm this 100% though. If you were to switch from a CL exhaust to a CB there may be some issues with clearance for the footpegs, kickstarter, brake pedal, etc.

not sure if it's the same on the 350s
but I do know that the 360s the collars are different
'75 Honda CB360 - thread