collapse

www.dimecitycycles.com

www.cognitomoto.com

https://www.townmoto.com/collections/vanson-leathers

www.speedmotoco.com

www.CITYLIMITMOTO.com

www.jadusmotorcycleparts.com

www.lostapostlejewelry.com

www.sparckmoto.com

www.pistonsociety.com


Author Topic: Going to look at a Virago 750 tonight. Questions.  (Read 1259 times)

Offline theadamie

  • Posts: 10
Going to look at a Virago 750 tonight. Questions.
« on: Dec 03, 2014, 19:32:04 »
Hey, I'm hoping to start my build soon.  I'm really hoping to pull off something similar to Greg Hageman or Stanley Tang's bike.  I know I need Greg's sub-frame and possibly his gas tank mount.  Do I need a separate seat pan if I use the same MotoLanna seat that these guys did? 

How much does Greg charge for his sub-frames and gas tank mount brackets?  I can't get a hold of him and he doesn't have any current listings on ebay -_-;;

I thought it would help if I could figure this out before I went to look at the bike, just in case they were unreasonable prices.  I've tracked down most of the other parts I would need.  Thanks!
When life gives you lemons do as the Romans - Voldermort

Offline hillsy

  • Posts: 4117
Re: Going to look at a Virago 750 tonight. Questions.
« Reply #1 on: Dec 03, 2014, 20:05:01 »
I think this might be the guy:
 
http://www.ebay.com/itm/Yamaha-Virago-Cafe-Racer-sub-frame-kit-/151419099965?pt=Motorcycles_Parts_Accessories&hash=item2341481b3d&vxp=mtr#ht_118wt_966
 
Be prepared to fork out over $600 for a spoked rear wheel if you want to ditch the cruiser mag that's already on there.

Offline theadamie

  • Posts: 10
Re: Going to look at a Virago 750 tonight. Questions.
« Reply #2 on: Dec 04, 2014, 00:12:37 »
I think this might be the guy:
 
http://www.ebay.com/itm/Yamaha-Virago-Cafe-Racer-sub-frame-kit-/151419099965?pt=Motorcycles_Parts_Accessories&hash=item2341481b3d&vxp=mtr#ht_118wt_966
 
Be prepared to fork out over $600 for a spoked rear wheel if you want to ditch the cruiser mag that's already on there.

Damn, I found something else that I thought was what I needed.  I might postpone this project if this is the case...  I found the price for DocChop's subframe that works with the MotoLanna seat and it was about $600 as well.  I'm not sure if this one that you posted would work or not. 
When life gives you lemons do as the Romans - Voldermort