collapse

www.dimecitycycles.com

https://www.townmoto.com/collections/vanson-leathers


www.restocycle.com

www.CITYLIMITMOTO.com

www.jadusmotorcycleparts.com

www.bisonmotorsports.com

www.speedmotoco.com

www.lostapostlejewelry.com

www.cognitomoto.com

www.sparckmoto.com

www.pistonsociety.com

www.steeltowngarage.com


Author Topic: Brodie's Workshop  (Read 20737 times)

Offline Weldangrind

  • Posts: 84
  • Quae nocent, docent
Re: Brodie's Workshop
« Reply #120 on: Oct 15, 2015, 01:37:28 »
That's the scariest mermaid I've ever seen.  Perhaps she's better looking after a few pints.

Online Brodie

  • DTT SUPPORTER
  • *
  • Posts: 2357
  • Gold Coast, Queensland
Re: Brodie's Workshop
« Reply #121 on: Dec 15, 2015, 18:43:43 »
So I added a fan, wall mount fans are bloody expensive. Which is why I bought a $11 pedestal fan and mounted it to the wall! Have to say it does not flow air very well.

Apparently there is a large wall mount fan in my near future.

Ohh and I finished the trench and ran the wiring, just need a sparky to hook up the sub board to the main board and the rest of the system in the shed.

Few more overtime shifts and it will be go!
I'm not sure, but don't ask Brodie.

Way to many build and half done projects to list here.
Sr250, Gs750, Z50A, XV1100, A10, Z160A.

Offline Erskine

  • Posts: 2163
Re: Brodie's Workshop
« Reply #122 on: Dec 15, 2015, 20:19:02 »
Good stuff. Here in the Northern Hemisphere it's pissy wet cold sideways rain gale blowing.

Offline Tune-A-Fishİ

  • DTT SUPPORTER
  • *
  • Posts: 6844
  • BOTM LOSER Proudly Deplorable
Re: Brodie's Workshop
« Reply #123 on: Dec 15, 2015, 20:33:31 »
Nice work, once you have power you can have cold beer ;D
"I didn't come here and I ain't leavin"  Willie Nelson

"love hard, live fast, die fun" Kacey Musgraves

"Like a Wreckin Ball!" Eric Church

Offline Weldangrind

  • Posts: 84
  • Quae nocent, docent
Re: Brodie's Workshop
« Reply #124 on: Dec 16, 2015, 02:25:04 »
Maybe you can find a decent used wall mount fan at a thrift store.

Online JadusMotorcycleParts

  • DTT SUPPORTER
  • *
  • Posts: 876
    • Jadus Motorcycle Parts
Re: Brodie's Workshop
« Reply #125 on: Dec 16, 2015, 03:29:58 »
Loved this thread Brodie.  Cheers for sharing.  Would love to have a property/backyard some day!

Online Brodie

  • DTT SUPPORTER
  • *
  • Posts: 2357
  • Gold Coast, Queensland
Re: Brodie's Workshop
« Reply #126 on: Feb 05, 2016, 19:27:08 »
Woah up there matey ........... it's the thin edge of the wedge.
It's scientifically proven that women don't see empty space as a blank canvas to do stuff. They see it as a void that need to be filled.
The resting state of a workshop is EMPTY! Relentless monitoring and enforcement needed.
If you let her store so much as a pair of shoes in there you're f'ked!
;)

Well, you were right. But I can say I did have a plan. I have developed the "1 month" rule. If it is in my shed for a month and I think it is not worth keeping it goes to the dump. If it is worth keeping it goes in a storage box, gets sealed up and goes under the house.

Total number of storage boxes in shed vs underhouse = 6/9. Three of which are full off my old consoles and computer gear. I need to go through them and sell, trade or throw out a heap of stuff.
The christmas tree and decorations rocked up in the shed last month. So they went under the house the next day.


In shed improvement news... I have fitted a sound system to the shed. It is a very basic 5.1 amp/sub with 4 speakers fitted through the L and R channels. Does the job quite well.

OHH and I sold my boat, my LS2 Yamaha, nearly sold the camper and have managed to be given another boat full of crap. It is like the shed is cursed to be filled with boats full of crap.
That will be going soon as a friend of mine who has asked me to store it is moving soon and will be taking it over to his new place.


Also installed a proper wall mount fan that my missus got me from christmas. It works a treat at keeping a breeze going. Now I just need to vent the shed better to remove the hot air. A solar heat extractor or 2 will be going on shortly.
Still need to get power down there lol. Has been a while. I just need to run the wiring and it is to bloody hot at the moment to do that.
« Last Edit: Feb 05, 2016, 19:29:11 by Brodie »
I'm not sure, but don't ask Brodie.

Way to many build and half done projects to list here.
Sr250, Gs750, Z50A, XV1100, A10, Z160A.

Offline andycafe

  • Posts: 1173
  • Northern Suburbs, Melbourne Victoria, Australia
Re: Brodie's Workshop
« Reply #127 on: Feb 05, 2016, 20:33:37 »
I liked that boat  8) Did you get a good number for it  ??? Good call on the shed rule, like an anti-hoarding measure  ;D

Offline Erskine

  • Posts: 2163
Re: Brodie's Workshop
« Reply #128 on: Feb 05, 2016, 21:18:54 »
Have you still not shifted that camper yet? Jeez.
I did warn you lol
Well done on putting your foot down!

Online Brodie

  • DTT SUPPORTER
  • *
  • Posts: 2357
  • Gold Coast, Queensland
Re: Brodie's Workshop
« Reply #129 on: Feb 05, 2016, 21:22:59 »
Ha nope. Camper ended up being given to me, I used it a few times and decided I prefer a tent. So I have gotten rid of the boat off it to my old man. Now my uncle wants to buy the camper.

Yeah I did like that boat as well. Got a good price, took a heap of things out of it and am selling/sold them. Spent the cash on stuff for the BSA.
I'm not sure, but don't ask Brodie.

Way to many build and half done projects to list here.
Sr250, Gs750, Z50A, XV1100, A10, Z160A.