I also installed a horn as I really didn't like riding without one. I honesty don't know where it came from, some old bike I must have had.I used the same mini button I used for the starter. I don't understand how they are supposed to be installed. They have a washer that perfectly fits the 7/8" bar, and are threaded with a nut. But there is no way to get the nut on and tighten it. I just did what I did on the starter and squirted some silicon into the hole with the button.Sent from my iPhone using DO THE TON
Ed, you know I love the bike, but looking at these pics, can't help but think the lowers are on the wrong sides. Would put calipers, lines etc. all to the rear. much cleaner. Like the green 850-T on the previous page.
Also a good option for GPS gauges:www.speedhut.com