collapse

www.dimecitycycles.com

www.cognitomoto.com

https://www.townmoto.com/collections/vanson-leathers

www.speedmotoco.com

www.CITYLIMITMOTO.com

www.jadusmotorcycleparts.com

www.lostapostlejewelry.com

www.sparckmoto.com

www.pistonsociety.com


Author Topic: 1974 CB360 Fallin' Ditch Hell Ride  (Read 63101 times)

Offline trek97

  • DTT SUPPORTER
  • *
  • DTT BOTM WINNER
  • *
  • Posts: 6506
Re: 1974 CB360 Fallin' Ditch Hell Ride
« Reply #290 on: May 27, 2017, 07:42:12 »
Are you building your brake hoses w part from 4into1 ?  And which crush washers are you using?

Offline irk miller

  • DTT SUPPORTER
  • *
  • DTT BOTM WINNER
  • *
  • Posts: 9134
  • You've been mostly-dead all day.
Re: 1974 CB360 Fallin' Ditch Hell Ride
« Reply #291 on: May 27, 2017, 07:44:45 »
Are you building your brake hoses w part from 4into1 ?  And which crush washers are you using?
Parts for the brake hoses come from Summit Racing.  I get 10mm crush washers from there too.  They have the rubber in them.

Offline irk miller

  • DTT SUPPORTER
  • *
  • DTT BOTM WINNER
  • *
  • Posts: 9134
  • You've been mostly-dead all day.
Re: 1974 CB360 Fallin' Ditch Hell Ride
« Reply #292 on: May 27, 2017, 08:12:13 »

It's kinda triangular/rhomboid on clutch side with a hole drilled through
This one?




Sent from my iPhone using DO THE TON

Offline crazypj

  • Posts: 13470
  • Split personality, I fake being smart
Re: 1974 CB360 Fallin' Ditch Hell Ride
« Reply #293 on: May 27, 2017, 15:40:56 »
Yep,that's the one.
AsI've now been thinking a bit harder about it, I think I will modify cover or crankcase to feed cam before anything else and make something to fitinto the 'hole'. I'll probably just have a screw in plug with a 1/16" hole so it still feeds some oil through there and will make system self priming (I think there could be a possibility of air lock if hole is just plugged?)
'you can take my word for it or argue until you find out I'm right'
Best thing I ever overheard
"yep, PJ's my boss, he taught me everything I know, just didn't teach me everything he knows"
Brian Morgan, 1982

CB360's,  http://www.dotheton.com/forum/index.php?topic=11736.0
XS650,  http://www.dotheton.com/forum/index.php?topic=11922.0

Offline Sonreir

  • Moderator
  • DTT SUPPORTER
  • *
  • Posts: 11349
  • Oregon
Re: 1974 CB360 Fallin' Ditch Hell Ride
« Reply #294 on: May 27, 2017, 20:34:55 »
Seemed an appropriate time to post this pic.
Sparck Moto - http://www.sparckmoto.com

Audaces fortuna iuvat.

1977 Honda CJ360 - Café SOS - Stage One™, Café SOS - Stage Two™
1976 Puch Maxi - APuchalypse Now
Suzi T500 Cobra Resto

Custom Gauge Graphics
Custom Wiring Harnesses

DTT Red, White, and/or Black 360 Club - Better than those Blue guys

Offline irk miller

  • DTT SUPPORTER
  • *
  • DTT BOTM WINNER
  • *
  • Posts: 9134
  • You've been mostly-dead all day.
Re: 1974 CB360 Fallin' Ditch Hell Ride
« Reply #295 on: May 28, 2017, 17:01:15 »
Thanks, Matt. I knew Mydlyfkryzis posted that in Hondatwins, but it was buried somewhere in a place I forgot about.


A $6 starter delete, which is nothing more than a 41mm - 44mm expansion plug used in intake manifolds, amongst other things.  I imagine a freeze plug would also work.





Sent from my iPhone using DO THE TON

Offline irk miller

  • DTT SUPPORTER
  • *
  • DTT BOTM WINNER
  • *
  • Posts: 9134
  • You've been mostly-dead all day.
Re: 1974 CB360 Fallin' Ditch Hell Ride
« Reply #296 on: May 28, 2017, 18:16:21 »
Since it's kickstart, I can use an early XL throttle.




Sent from my iPhone using DO THE TON

Offline Brodie

  • DTT SUPPORTER
  • *
  • Posts: 2552
  • Gold Coast, Queensland
Re: 1974 CB360 Fallin' Ditch Hell Ride
« Reply #297 on: May 28, 2017, 19:06:44 »
Nice
I'm not sure, but don't ask Brodie.

Way to many build and half done projects to list here.
Sr250, Gs750, Z50A, XV1100, A10, Z160A.

Offline irk miller

  • DTT SUPPORTER
  • *
  • DTT BOTM WINNER
  • *
  • Posts: 9134
  • You've been mostly-dead all day.
Re: 1974 CB360 Fallin' Ditch Hell Ride
« Reply #298 on: Jun 01, 2017, 16:22:01 »
After much thought and consternation, I went down to 3 AN line and fittings.






Sent from my iPhone using DO THE TON

Offline Sonreir

  • Moderator
  • DTT SUPPORTER
  • *
  • Posts: 11349
  • Oregon
Re: 1974 CB360 Fallin' Ditch Hell Ride
« Reply #299 on: Jun 01, 2017, 16:23:39 »
For the locations where you tapped the rocker cover: How did you choose them?
Sparck Moto - http://www.sparckmoto.com

Audaces fortuna iuvat.

1977 Honda CJ360 - Café SOS - Stage One™, Café SOS - Stage Two™
1976 Puch Maxi - APuchalypse Now
Suzi T500 Cobra Resto

Custom Gauge Graphics
Custom Wiring Harnesses

DTT Red, White, and/or Black 360 Club - Better than those Blue guys