collapse

www.dimecitycycles.com

www.cognitomoto.com

https://www.townmoto.com/collections/vanson-leathers

www.speedmotoco.com

www.CITYLIMITMOTO.com

www.jadusmotorcycleparts.com

www.lostapostlejewelry.com

www.sparckmoto.com

www.pistonsociety.com


Author Topic: 1982 cb750sc primary sprocket guard  (Read 893 times)

Offline 1982cb750sc

  • Posts: 2
1982 cb750sc primary sprocket guard
« on: Oct 17, 2016, 22:21:10 »
Is the plastic piece that is fastened to the smaller primary sprocket with 2 screws necessary?  I just put on a new chain and the master link  keeps rubbing, and slightly binding on this guard.  It does seem to serve much of a purpose so I wasn't sure if I needed it.  Any advice is much appreciated.

Offline 1982cb750sc

  • Posts: 2
Re: 1982 cb750sc primary sprocket guard
« Reply #1 on: Oct 17, 2016, 22:53:00 »
I also wanted to mention that the new primary sprocket I replaced it with is a tooth smaller.  That may be the reason it's rubbing.  I might be able to just cut a sliver off the guard to give it some room.


Sent from my iPhone using DO THE TON