Yes thanks for all the info
No the bike was not running
It had been garaged since 92 it was complete except the seat even the rusty tool kit
As far as engine work I've done all myself with assistance from my job
I work at a precision machine shop
The engine was pretty clean
Inside and out once I got all the case screws out
I've upgraded to Allen bolts
For assembly
As far as Pistons the originals were decent just cleaned em up and cylinders just need a fresh hone to get fresh cross hatches
All measurements were well within tolerance
It's a slow process
one part a week i try to buy
Working on new gasket set and rings and tensioner kit
Then motor should be all buttoned up
Sent from my iPhone using
DO THE TON