collapse

www.dimecitycycles.com

https://www.townmoto.com/collections/vanson-leathers


www.restocycle.com

www.CITYLIMITMOTO.com

www.jadusmotorcycleparts.com

www.bisonmotorsports.com

www.speedmotoco.com

www.lostapostlejewelry.com

www.cognitomoto.com

www.sparckmoto.com

www.pistonsociety.com

www.steeltowngarage.com


Author Topic: CB350 Scrambler Siblings  (Read 9813 times)

Offline 540Nova

  • Posts: 98
Re: CB350 Scrambler Siblings
« Reply #70 on: Apr 19, 2017, 12:15:22 »
I'm right behind you...


Sent from my iPhone using Tapatalk

Offline ncologerojr

  • Posts: 771
    • Catskill Mtn. Customs
Re: CB350 Scrambler Siblings
« Reply #71 on: Apr 19, 2017, 13:30:44 »
I'm right behind you...


Sent from my iPhone using Tapatalk
You don't waste any time!

Thanks man, I'm trying to make a deadline to help out one of my customers with shipping.

Make sure you box in that tubing really well at the transition to the stamped frame member.


Offline ncologerojr

  • Posts: 771
    • Catskill Mtn. Customs
Re: CB350 Scrambler Siblings
« Reply #72 on: Apr 25, 2017, 20:43:28 »
Got started on my stepped exhausts today. 1.25" to 1.5". The 1.25" is very close in length to the stock sleeves. The muffler has a 1" quiet core. One exhaust will be ceramic coated black and the other raw stainless.





Good fit-up makes good welds.


Offline 540Nova

  • Posts: 98
Re: CB350 Scrambler Siblings
« Reply #73 on: Apr 26, 2017, 01:16:58 »


Make sure you box in that tubing really well at the transition to the stamped frame member.

Definitely will do. I'm also going to miter in a 1" round tube horizontally right behind the tank, just behind the square/round transition.
When you send your horizontal seat tubes forward, are you bending the tubing right before the tank, to insert into the square tubes? I forget, it's something like 5.5"  between those tubes, and I found that just squeezing my tubes from the hoop, to fit, doesn't allow the seat stays to align with the hoop tubes.
I guess I have to buy a tubing bender.


Sent from my iPhone using Tapatalk

Offline 540Nova

  • Posts: 98
Re: CB350 Scrambler Siblings
« Reply #74 on: Apr 26, 2017, 01:19:49 »
That's an interesting exhaust transition. Gathering all the supplies to make a 1.25" SS exhaust myself. Still trying to come up with a flange, where it goes into the head.
Can you share a picture of yours?


Sent from my iPhone using Tapatalk

Offline ncologerojr

  • Posts: 771
    • Catskill Mtn. Customs
Re: CB350 Scrambler Siblings
« Reply #75 on: Apr 27, 2017, 13:15:55 »
That's an interesting exhaust transition. Gathering all the supplies to make a 1.25" SS exhaust myself. Still trying to come up with a flange, where it goes into the head.
Can you share a picture of yours?


Sent from my iPhone using Tapatalk

I use the stock clamps, I like them.

Offline ncologerojr

  • Posts: 771
    • Catskill Mtn. Customs
Re: CB350 Scrambler Siblings
« Reply #76 on: Apr 27, 2017, 14:14:20 »
A little paint preview.

Offline JesperHusky

  • Posts: 3
Re: CB350 Scrambler Siblings
« Reply #77 on: Apr 27, 2017, 17:28:37 »
Got started on my stepped exhausts today. 1.25" to 1.5". The 1.25" is very close in length to the stock sleeves. The muffler has a 1" quiet core. One exhaust will be ceramic coated black and the other raw stainless.





Good fit-up makes good welds.


Will this nice exhaust be available for sale someday?

Offline ncologerojr

  • Posts: 771
    • Catskill Mtn. Customs
Re: CB350 Scrambler Siblings
« Reply #78 on: Apr 27, 2017, 17:42:12 »
Will this nice exhaust be available for sale someday?

Yes, that is the plan. Handmade and purge welded with quality 16ga stainless. I am hoping to have pricing and a few sets ready to ship by the end of May. I'll probably start a thread on here, but I will definitely have the info on my website asap. CatskillMtnCustoms.com

Thanks for the interest!


Offline ncologerojr

  • Posts: 771
    • Catskill Mtn. Customs
CB350 Scrambler Siblings
« Reply #79 on: Apr 30, 2017, 09:28:05 »
Stainless exhaust all tacked up and ready for finish welding. I'm really happy with this design.





« Last Edit: Apr 30, 2017, 09:29:57 by ncologerojr »