collapse

www.dimecitycycles.com

www.cognitomoto.com

https://www.townmoto.com/collections/vanson-leathers

www.speedmotoco.com

www.CITYLIMITMOTO.com

www.jadusmotorcycleparts.com

www.lostapostlejewelry.com

www.sparckmoto.com

www.pistonsociety.com


Author Topic: YZF750/1000R - The Fly  (Read 48147 times)

Offline Maritime

  • DTT SUPPORTER
  • *
  • Posts: 9804
Re: YZF750/1000R - The Fly
« Reply #250 on: Mar 14, 2018, 13:40:55 »
You use the same kind of rod as the plastic you are welding, polypropylene, abs, etc...    Post up a source of the abs rolls if you can. 


You may want to chemical weld then. you can use MEK and abs chunks and make a slurry to apply and then it turns back into solid ABS, you can use a little glass mat or cloth to make it stronger. I will be using that technique this spring to fix the ABS front on my camper.  Just need a respirator to not die
The GL Rebirth: http://www.dotheton.com/forum/index.php?topic=68337.0
CX500 Low budget Bobber : http://www.dotheton.com/forum/index.php?topic=43617.0
"Beer makes you feel the way you ought to feel without beer" -Henry Lawson
"Beer is proof that God loves us and wants us to be happy." - Thomas Jefferson

Offline 1fasgsxr

  • Posts: 1667
Re: YZF750/1000R - The Fly
« Reply #251 on: Mar 14, 2018, 13:43:29 »
Man that is a nasty crack!!  Good luck.
http://www.dotheton.com/forum/index.php?topic=41083.0

Life is a journey from the maternity ward to the crematorium....

Online Hurco550

  • DTT SUPPORTER
  • *
  • DTT BOTM WINNER
  • *
  • Posts: 3941
  • Keep er' Between the ditches
Re: YZF750/1000R - The Fly
« Reply #252 on: Mar 14, 2018, 13:47:08 »
Welding is stupid.
"If you just picked up a drug habbit instead of a kawasaki triple at least you could get high while you waste money"
~ bradj
1988 tw200, the swamp donkey: http://www.dotheton.com/forum/index.php?topic=75455.0
2006 Suzuki DR650 Adventure monowheel trailer build: http://www.dotheton.com/forum/index.php?topic=75033.0
1976 BMW R90/6 farkilitious: http://www.dotheton.com/forum/index.php?topic=74349.msg882477#msg882477
1975 RD350 Road Racer: http://www.dotheton.com/forum/index.php?topic=70652.msg833688#msg833688
1976 GT250 Rebuild: http://www.dotheton.com/forum/index.php?topic=64973.new#new
Full Custom Pit Bike: http://www.dotheton.com/forum/index.php?topic=66954.new#new
1971 Yamaha 90cc twin HS1: http://www.dotheton.com/forum/index.php?topic=70498.0
"much ingenuity with a little money is more profitable and amusing than much money without ingenuity" - Arnold Bennet


Online canyoncarver

  • DTT SUPPORTER
  • *
  • Posts: 3945
  • 'hacking is learning'
Re: YZF750/1000R - The Fly
« Reply #254 on: Mar 14, 2018, 14:12:45 »
You may want to chemical weld then. you can use MEK and abs chunks and make a slurry to apply and then it turns back into solid ABS, you can use a little glass mat or cloth to make it stronger. I will be using that technique this spring to fix the ABS front on my camper.  Just need a respirator to not die

Yeah, I also considered abs cement and abs chips to make a slurry and to do it that way.   Once I practice on the carcasses I have, I'll have a better idea about which way to go because of the graphics. 


Online canyoncarver

  • DTT SUPPORTER
  • *
  • Posts: 3945
  • 'hacking is learning'
Re: YZF750/1000R - The Fly
« Reply #255 on: Mar 14, 2018, 14:13:50 »
You guys and your abs.



I have 6 pack abs under my pony keg. 

Offline Maritime

  • DTT SUPPORTER
  • *
  • Posts: 9804
Re: YZF750/1000R - The Fly
« Reply #256 on: Mar 14, 2018, 14:18:56 »
The slurry by itself isn't as strong as a weld but if you bury cloth or mat in it it should be. I think the welder will ruin the graphics on  you but maybe not.
The GL Rebirth: http://www.dotheton.com/forum/index.php?topic=68337.0
CX500 Low budget Bobber : http://www.dotheton.com/forum/index.php?topic=43617.0
"Beer makes you feel the way you ought to feel without beer" -Henry Lawson
"Beer is proof that God loves us and wants us to be happy." - Thomas Jefferson

Online advCo

  • DTT BOTM WINNER
  • *
  • Posts: 3186
  • Nick Ol' Eye
    • adventur Studios
Re: YZF750/1000R - The Fly
« Reply #257 on: Mar 14, 2018, 15:12:10 »
Slim chance you can save that decal. You'd have to repair it from the back as Mike said using cloth, etc. and you'd still see the crack through it regardless.

If you get a sheet of trace paper and trade the outer contours, we can reproduce that graphic (assuming they aren't readily available).

Online canyoncarver

  • DTT SUPPORTER
  • *
  • Posts: 3945
  • 'hacking is learning'
Re: YZF750/1000R - The Fly
« Reply #258 on: Mar 14, 2018, 16:10:41 »
Slim chance you can save that decal. You'd have to repair it from the back as Mike said using cloth, etc. and you'd still see the crack through it regardless.

If you get a sheet of trace paper and trade the outer contours, we can reproduce that graphic (assuming they aren't readily available).

The graphics are sometimes available but silly expensive, like over 250$ per side.  I don't expect my repair to be visually perfect from the outside.  I rode it like this all last fall and can live with the look I just don't want it to get worse.   I mean, I want it to look good but I'm managing my expectations on the possibilities. 

Offline irk miller

  • DTT SUPPORTER
  • *
  • DTT BOTM WINNER
  • *
  • Posts: 9002
  • You've been mostly-dead all day.
Re: YZF750/1000R - The Fly
« Reply #259 on: Mar 14, 2018, 16:18:11 »
I've repaired a bunch of plastics with G/Flex.  You can use pigments to color match.  In fact, most 2 part epoxy and plastic can be pigmented.