collapse

www.dimecitycycles.com

www.cognitomoto.com

https://www.townmoto.com/collections/vanson-leathers

www.speedmotoco.com

www.CITYLIMITMOTO.com

www.jadusmotorcycleparts.com

www.lostapostlejewelry.com

www.sparckmoto.com

www.pistonsociety.com


Author Topic: Latest project - Suzonda WTF200/2 in progress  (Read 14889 times)

Offline NoRiders

  • Posts: 834
Re: Latest project - Suzonda WTF200/2 in progress
« Reply #100 on: Apr 28, 2019, 17:57:44 »
Replacement NSR125 forks/wheel/caliper installed....just need new taper bearings. And another top yoke.



Sprocket/swingarm alignment working out OK I reckon.



Getting closer to final mount position for the engine.....any ideas on engine inclination datum?

 

That's all for now


Offline NoRiders

  • Posts: 834
Re: Latest project - Suzonda WTF200/2 in progress
« Reply #101 on: May 12, 2019, 19:51:03 »
It's rolling...:)



Aligned the rear wheel using threading and extra nuts....I now know the size of the spacers.





Stage1 engine mount fabrication..




Offline beachcomber

  • DTT SUPPORTER
  • *
  • Posts: 4116
  • TJ - Beachcomber
Re: Latest project - Suzonda WTF200/2 in progress
« Reply #102 on: May 14, 2019, 17:54:02 »
One cool ride !!!!! 8) 8)
"if at first you don't succeed, you've already been a failure once"

" we're not going back to the sixties - we never left "

"yep, nostalgia ain't what it used to be"

"I used to be indecisive - now I'm not so sure"

Offline NoRiders

  • Posts: 834
Re: Latest project - Suzonda WTF200/2 in progress
« Reply #103 on: May 20, 2019, 10:47:10 »
When you're at a VW event and score a tyre cheap. 10 bargain 110/70x17" Kingstone tracker style tread pattern should do the job of sunny runs down the coffee shop I reckon ;)



Also incoming: 3x25mm flat bar for enging mounts.
Headlight mounts.

Moving along....

Offline NoRiders

  • Posts: 834
Re: Latest project - Suzonda WTF200/2 in progress
« Reply #104 on: May 22, 2019, 06:54:10 »
Front disc cleaned up well enough :)


Offline NoRiders

  • Posts: 834
Re: Latest project - Suzonda WTF200/2 in progress
« Reply #105 on: May 23, 2019, 10:49:25 »
GT200 5xspeed, electric start engine....incoming.  ;D