Hi I was hoping maybe you could give me some tips or insight. I have a 1973 CB500 I rode it for the first summer I had it. It rode great except the rear springs had been cut so going over any bump would nearly break your back. The forks seals were leaking, and the triple tree clamp was cracked. I waited till winter to fix everything. I orderes a used triple tree off eBay and took my wheels and forks off to a shop to have new wheel bearings put in and fork seals. I put everything back together and noticed the bike felt unstable in turns so I started asking around and a lot of people said change steering stem bearings so I did. I put the bike back together and still unstable in turns. I tried replacing rear springs with used factory Honda springs. I also Checked the fork oil and realized it had none. So I put in 10w30 according to the manual. Still it feels unstable in turns and I have stopped riding it altogether because it started feeling unstable at low speeds. Any idea what I could check or try that I haven’t already? Thanks for any help.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk