collapse

www.dimecitycycles.com

https://www.townmoto.com/collections/vanson-leathers


www.restocycle.com

www.CITYLIMITMOTO.com

www.jadusmotorcycleparts.com

www.bisonmotorsports.com

www.speedmotoco.com

www.lostapostlejewelry.com

www.cognitomoto.com

www.sparckmoto.com

www.Moto-Madness.com

www.pistonsociety.com

www.steeltowngarage.com


Author Topic: modified, aftermarket, or custom. nothing is safe (78 KZ1000)  (Read 53476 times)

Offline der_nanno

  • Posts: 407
  • Faster!
    • Greasy Greg
Re: modified, aftermarket, or custom. nothing is safe (78 KZ1000)
« Reply #340 on: May 10, 2018, 10:00:51 »
Making a turbo kit yourself on these bikes is dead easy as long as you get yourself a carbon sealed turbo. Make sure you get a carbon sealed GT25 or GT28 with a ballbearing and even the low oilpressure shouldn't be much of an issue. For the oil-feed you can use the check plug behind the cylinder with a restrictor.

If you want to save yourself a lot of headache go for the biggest Mikuni flatslide you can find, which currently I think is a HSR48 and have a look at classic Mr. Turbo and ATP kits. Instead of the 70ies-style flat flanges, I'd do some V-band flanges instead as they seal nicer and align better.

You'll get away with up to around 7 or 8PSI on standard compression ratios and stock pistons. (Nothing fancy in that respect on my Turbo TR1, I can assure you!) If you want to go higher, turbo pistons and lowered compression are a must. Even though you might be able to sneak in the odd PSI by running a boost retarded ignition and water-meth injection, but really you're living on the edge by then and one thing going wrong basically means boom.
« Last Edit: May 10, 2018, 10:02:41 by der_nanno »
Real freedom starts with the freedom of thought.

My Blog:
http://greasygreg.blogspot.co.at

My Mule TR1.1 build here on DTT:
http://www.dotheton.com/forum/index.php?topic=75458.0

My Turbo TR1.1 (XV1000) build here on DTT:
http://www.dotheton.com/forum/index.php?topic=72571

My XS Triple Sidecar build here on DTT:
http://www.dotheton.com/forum/index.php?topic=74211

Offline doc_rot

  • DTT BOTM WINNER
  • *
  • DTT SUPPORTER
  • *
  • Posts: 1097
  • Oh the usual... I bowl, I drive around...
Re: modified, aftermarket, or custom. nothing is safe (78 KZ1000)
« Reply #341 on: Jun 25, 2018, 16:09:07 »
Been riding this bike a lot. Had it down at Laguna Seca for WSBK and Moto America. Camped at the track, good times.

Offline squirley

  • DTT BOTM WINNER
  • *
  • Posts: 123
Re: modified, aftermarket, or custom. nothing is safe (78 KZ1000)
« Reply #342 on: Aug 22, 2018, 22:06:20 »
Just read the entire post...what an awesome build!
Can you fill me in on the seat latch that you used? Thank ya much.

Jens

Offline doc_rot

  • DTT BOTM WINNER
  • *
  • DTT SUPPORTER
  • *
  • Posts: 1097
  • Oh the usual... I bowl, I drive around...
Re: modified, aftermarket, or custom. nothing is safe (78 KZ1000)
« Reply #343 on: Aug 28, 2018, 03:29:17 »
Just read the entire post...what an awesome build!
Can you fill me in on the seat latch that you used? Thank ya much.

Jens

I don't remember exactly what i used, i just typed "atv seat latch" in ebay and picked one that looked like it would work.
something like this. too far back to look up, so i'm not sure.
https://www.ebay.com/itm/1991-91-Suzuki-LT230E-LT230-QuadRunner-Seat-Latch-Release-Cable-Support-Bracket/312001798160?hash=item48a4c1a010:g:DvEAAOSwGwlaASJD&vxp=mtr
« Last Edit: Aug 28, 2018, 03:52:09 by doc_rot »

Online irk miller

  • DTT SUPPORTER
  • *
  • DTT BOTM WINNER
  • *
  • Posts: 7877
  • You've been mostly-dead all day.
Re: modified, aftermarket, or custom. nothing is safe (78 KZ1000)
« Reply #344 on: Aug 28, 2018, 07:24:14 »
I use them for most of my bikes, too.  GSXR pillion seat latches are usually what I get.  Same thing.  Certain model Kawasaki street bikes, like Ninjas use them too.