78 Goldwing Carb Flooding....

[cxman]

to hot to go to the loft now

 i will check in the morning sorry been slammed

[cbrianroll]

No worries, whenever is good for you, thank you much

Sent from my SM-G930V using DO THE TON mobile app

[cxman]

the ones i had upstairs are 768 i will look at the main shop tomorrow

[cbrianroll]

Sweet, thanks!

Sent from my SM-G930V using DO THE TON mobile app

[cbrianroll]

Hey Murray, did you ever make it to your shop? Rebuild kit came today so I'm getting ready to do something lol thanks

Sent from my SM-G930V using DO THE TON mobile app

[pidjones]

Randakk makes a post repair kit, too. Follow his advice and use only Honda float valves and seats. I lucked out and found a lightly used set for mine on eBay. It's the only way to get the inlet screens if they are missing as all of mine were.

"Love 'em all.... Let God sort 'em out."

[cbrianroll]

Thank you very muc sir! I just got his master overhaul kit. I repaired Post in the past on single carb so I did a repair on this one I was just hoping to get a cool replacement. Drill ed hole in post screwed in little screw, threaded the body and gasproof jbweld stuff just for extra. Will be ordering a kit just in case though LOL I did follow his advice and used a OEM Honda new one I had one needle seat that got bad and corroded somehow. Love your biuld by the way looks fantastic I'm slowly getting closer to mine LOL I am only at the engine stage so far.

[pidjones]

Hey, that's looking great! I did my carbs five years ago when I first bought her. Tried the Keyster kits but ended up stripping them out for Randakk's o-rings and lurking eBay for the float valves. I did my leak testing with isopropyl alcohol and a Mighty Vac. This was because our garage is in the basement and my wife is sensitive to gas fumes. Glad I did, because they came apart several times to correct things.

[cbrianroll]

Oh man...alcohol! Brilliant! I hate gas.

Sent from my SM-G930V using DO THE TON mobile app

[pidjones]

Use the 91% or better. If any is left, it will mix and burn. One of my favorite solvents - but it IS flammable! Doesn't burn your hands, though (even if you get it under a ring). Of course, carb cleaner is a necessary evil for cleaning them.

Oh man...alcohol! Brilliant! I hate gas.

Sent from my SM-G930V using DO THE TON mobile app