collapse

www.dimecitycycles.com

www.cognitomoto.com

https://www.townmoto.com/collections/vanson-leathers

www.speedmotoco.com

www.CITYLIMITMOTO.com

www.jadusmotorcycleparts.com

www.lostapostlejewelry.com

www.sparckmoto.com

www.pistonsociety.com


Author Topic: Cb360 Reassembly Help  (Read 21055 times)

Offline advCo

  • DTT BOTM WINNER
  • *
  • Posts: 3106
  • Nick Ol' Eye
    • adventur Studios
Re: Cb360 Reassembly Help
« Reply #370 on: Mar 14, 2019, 10:20:44 »
Now that you have it running, get it timed with a light and then sync the carbs. It'll make a world of difference.

If the bike was running for a few minutes no problem and just died, you may want to check the voltage on your battery and then next time you have it running put the multimeter on there and make sure you're charging right.

Offline cb360j

  • Posts: 297
Re: Cb360 Reassembly Help
« Reply #371 on: Mar 14, 2019, 11:44:44 »
Once I verify what the issue was that made it die I will check the voltage. After that I went to try and start it again using a battery charger because after pushing the starter for so long it dies, and it was only turning the starter so thats why I think the advancer came off the pin.
However when it did start, i just bumped the push start an it fired right up.

Offline pidjones

  • Posts: 841
Re: Cb360 Reassembly Help
« Reply #372 on: Mar 15, 2019, 00:41:25 »
Congrats! One of the sweetest sounds is when all the hard work pays off and you hear that first bust of pleasure.
"Love 'em all.... Let God sort 'em out!"

Offline cb360j

  • Posts: 297
Re: Cb360 Reassembly Help
« Reply #373 on: Mar 15, 2019, 18:15:21 »
I was right, the advancer came off the pin and threw the timing off. Got it all timed and starts up on first bump every single time now! God is great.
Now for carb tuning. I printed the manual pages on how to tune the carbs, but turning the throttle stop screw counter clockwise will not slow the engine RPM down. It is idling at about 4k rpm at the moment. I also tried adjusting the pilot screw but still no difference.

Offline cb360j

  • Posts: 297
Re: Cb360 Reassembly Help
« Reply #374 on: Mar 15, 2019, 18:38:21 »
New info:

I pulled the air filters off just to look at the carb slides, the right is all the way open and the left is much more closed. Assuming the means sync the carbs? Do I adjust the throttle speed then get them synced? (the throttle speed wont adjust)

Online trek97

  • DTT SUPPORTER
  • *
  • DTT BOTM WINNER
  • *
  • Posts: 6391
Re: Cb360 Reassembly Help
« Reply #375 on: Mar 15, 2019, 18:46:34 »
God is great.


Maybe, just maybe if we all say a prayer for your carbs... ::)

Offline cb360j

  • Posts: 297
Re: Cb360 Reassembly Help
« Reply #376 on: Mar 15, 2019, 18:57:38 »
I wouldn't deny such a gracious thing, but no such thing is solely up to me lol

Online trek97

  • DTT SUPPORTER
  • *
  • DTT BOTM WINNER
  • *
  • Posts: 6391
Re: Cb360 Reassembly Help
« Reply #377 on: Mar 15, 2019, 19:03:11 »
Sharing files from my google drive.  free for you to download and keep and read.

Honda carb manual...

https://drive.google.com/open?id=0B94qfPnRdKQaMlpzTGhYNGRGMlk

Official Honda workshop manual...

https://drive.google.com/open?id=0B94qfPnRdKQaZXcwamc4Y2pWRkU

Online trek97

  • DTT SUPPORTER
  • *
  • DTT BOTM WINNER
  • *
  • Posts: 6391

Offline cb360j

  • Posts: 297
Re: Cb360 Reassembly Help
« Reply #379 on: Mar 15, 2019, 19:12:13 »
Word, thank you very much!