Quantcast
collapse

www.dimecitycycles.com

www.cognitomoto.com

https://www.townmoto.com/collections/vanson-leathers

www.speedmotoco.com

www.CITYLIMITMOTO.com

www.jadusmotorcycleparts.com

www.lostapostlejewelry.com

www.sparckmoto.com

www.pistonsociety.com


Author Topic: 1971 Kawasaki g3ss cafe project  (Read 11336 times)

Offline fieldpice

  • Posts: 123
Re: 1971 Kawasaki g3ss cafe project
« Reply #80 on: Dec 30, 2016, 16:30:57 »
It's premix synthetic blend, one gallon pre mix amount, and I leaned out the mix with more gas, maybe it's just building up in there? I took of the restrictive exhaust, now I need to figure the issue out, was also thinking it might be running too rich


Sent from my iPhone using DO THE TON

Offline fieldpice

  • Posts: 123
1971 Kawasaki g3ss cafe project
« Reply #81 on: Jan 04, 2017, 22:02:23 »
Ok I read up on the symptoms and all is leading to no compression, I checked it and had good compression the first 4 kicks 120psi. Then I released the pressure and kicked it over again, this time it would not hold any pressure.  not sure what to think but my better judgment is telling me to replace the rings. So I will do that soon.

Offline fieldpice

  • Posts: 123
Re: 1971 Kawasaki g3ss cafe project
« Reply #82 on: Apr 16, 2017, 14:15:49 »
Help needed, I can't seem to find the right piston rings, this bike has a 100cc piston and it measures 47.0mm this was aftermarket. Can anyone point me on the right direction. I only get part numbers for most part online and no exact measurements


Sent from my iPhone using DO THE TON

Offline fieldpice

  • Posts: 123
Re: 1971 Kawasaki g3ss cafe project
« Reply #83 on: Apr 29, 2019, 11:00:34 »
Alright back at it again with a new game plan..... A brand new motor, clone of a Suzuki AX100 from Lifan motors.


Sent from my iPhone using DO THE TON

Offline Luugo86

  • Posts: 809
  • '73 CB350, '78 XS650 Cafe Killer
    • ToadStool Cycle Co.
Re: 1971 Kawasaki g3ss cafe project
« Reply #84 on: Apr 29, 2019, 13:04:03 »
Did the clone motor come with a wiring harness?
Live to Die, Die to Live

Offline fieldpice

  • Posts: 123
Re: 1971 Kawasaki g3ss cafe project
« Reply #85 on: May 01, 2019, 12:11:10 »
No wire harness was included, I was thinking of just splicing and bullet connecting them. The clone engine came with some accessories including the carburetor, kickstarter, spark plug, shifter, coil for plug


Sent from my iPhone using DO THE TON

Offline fieldpice

  • Posts: 123
Re: 1971 Kawasaki g3ss cafe project
« Reply #86 on: May 12, 2019, 13:15:45 »
In shambles , about halfway done with the relocation of the motor mount brackets.


Sent from my iPhone using DO THE TON

Offline fieldpice

  • Posts: 123
Re: 1971 Kawasaki g3ss cafe project
« Reply #87 on: Oct 14, 2019, 14:36:50 »
Coming together, need some electrical work and some odds and ends .


Sent from my iPhone using DO THE TON