collapse

www.dimecitycycles.com

www.cognitomoto.com

https://www.townmoto.com/collections/vanson-leathers

www.speedmotoco.com

www.CITYLIMITMOTO.com

www.jadusmotorcycleparts.com

www.lostapostlejewelry.com

www.sparckmoto.com

www.pistonsociety.com


Author Topic: Black Knight..Brake upgrade  (Read 37281 times)

Offline trek97

  • DTT SUPPORTER
  • *
  • DTT BOTM WINNER
  • *
  • Posts: 6499
Re: The Black Knight, HOORAY its CARB DAY!!!
« Reply #270 on: Oct 08, 2018, 20:57:11 »
The sonic softened the gaskets but it to the Dremel to finish them,



Its just freaky to me, how they could possibly drill these in a mass production environment.


Online irk miller

  • DTT SUPPORTER
  • *
  • DTT BOTM WINNER
  • *
  • Posts: 9099
  • You've been mostly-dead all day.
Re: The Black Knight, HOORAY its CARB DAY!!!
« Reply #271 on: Oct 08, 2018, 21:28:00 »
Ask Kiley about having to make an emulsion tube this weekend for Jason's XS, since it didn't have one in one of the carbs.

Offline trek97

  • DTT SUPPORTER
  • *
  • DTT BOTM WINNER
  • *
  • Posts: 6499
Re: The Black Knight, HOORAY its CARB DAY!!!
« Reply #272 on: Oct 08, 2018, 21:30:48 »
Ask Kiley about having to make an emulsion tube this weekend for Jason's XS, since it didn't have one in one of the carbs.

OMG hahah. Oops.  And What, Like the worlds largest swap meet and he couldn't find a one???   ::)

Online canyoncarver

  • DTT SUPPORTER
  • *
  • Posts: 3986
  • 'hacking is learning'
Re: The Black Knight, HOORAY its CARB DAY!!!
« Reply #273 on: Oct 08, 2018, 21:32:30 »
How loud is the ultrasonic cleaner?  Just curious..


Offline trek97

  • DTT SUPPORTER
  • *
  • DTT BOTM WINNER
  • *
  • Posts: 6499
Re: The Black Knight, HOORAY its CARB DAY!!!
« Reply #275 on: Oct 08, 2018, 21:38:01 »
How loud is the ultrasonic cleaner?  Just curious..

All but silent.  Maybe like the same as a box fan running.  Just a low buzzing hum in the background of Pandora.

honestly I was surprised.
« Last Edit: Oct 08, 2018, 21:42:34 by trek97 »

Offline trek97

  • DTT SUPPORTER
  • *
  • DTT BOTM WINNER
  • *
  • Posts: 6499
Re: The Black Knight, HOORAY its CARB DAY!!!
« Reply #276 on: Oct 08, 2018, 21:40:08 »
As fuck.

LOLOLOL. Yes Kelly its Loud like a Fire Engine crashing into a Freight train crashing into a 747.

Online irk miller

  • DTT SUPPORTER
  • *
  • DTT BOTM WINNER
  • *
  • Posts: 9099
  • You've been mostly-dead all day.
Re: The Black Knight, HOORAY its CARB DAY!!!
« Reply #277 on: Oct 08, 2018, 21:43:24 »
OMG hahah. Oops.  And What, Like the worlds largest swap meet and he couldn't find a one???   ::)
Takes less time to make one.  A needle in a haystack at a swap meet.

Offline trek97

  • DTT SUPPORTER
  • *
  • DTT BOTM WINNER
  • *
  • Posts: 6499
Re: The Black Knight, HOORAY its CARB DAY!!!
« Reply #278 on: Oct 08, 2018, 21:47:45 »
Cleaned up nice and going to re-use all the original brass...except, of course the new float needles will go in, as the old springs are mushy.



MAYBE the float needle seats too.  If I do use them I will try to polish the needle seats up nice.




Offline trek97

  • DTT SUPPORTER
  • *
  • DTT BOTM WINNER
  • *
  • Posts: 6499
Re: The Black Knight, HOORAY its CARB DAY!!!
« Reply #279 on: Oct 08, 2018, 21:59:23 »
I do have to use the new float needle seats. 

There is a 1/10mm difference in O-ring groove diameter.

Probably Keihin use some bastard size and the new one uses off the shelf.

 >:(