Author Topic: Wrench Turning Detectives... 1/2 turn out?  (Read 272 times)

Offline davidricci

  • Posts: 78
Wrench Turning Detectives... 1/2 turn out?
« on: Jul 16, 2018, 05:25:58 »
Dear Wrenchturning Detectives,

I have a 68 CB 450 stock everything, with scrambler pipes, everything rebuilt/adjusted spot on, carbs, timing, valves all triple checked, air filters from Scrambler Cycle, new coils. The bike likes to run at a half turn out on the pilot screw, any more and the plugs get black after a couple of hours. 

Should I run it at 1/2 turn out on pilot?

Thoughts, advice gladly appreciatively accepted. -David
« Last Edit: Jul 20, 2018, 07:33:19 by davidricci »