collapse

www.cognitomoto.com

www.dimecitycycles.com

https://www.townmoto.com/collections/vanson-leathers


www.restocycle.com

www.CITYLIMITMOTO.com

www.jadusmotorcycleparts.com

www.bisonmotorsports.com

www.speedmotoco.com

www.lostapostlejewelry.com

www.sparckmoto.com

www.pistonsociety.com

www.steeltowngarage.com


Author Topic: artists or designers  (Read 1088 times)

Offline themotoworks

  • Posts: 97
    • the motoworks
artists or designers
« on: Aug 25, 2018, 18:46:12 »
are there any artists and or designers, graphic, industrial, etc on here?  preferably professional or with a degree?  I'd love to have a few people to help critique some of my bike concepts before I get to thinking they're all that and a bag of chips. 

Offline trek97

  • DTT SUPPORTER
  • *
  • DTT BOTM WINNER
  • *
  • Posts: 6093
Re: artists or designers
« Reply #1 on: Aug 25, 2018, 19:14:05 »
I have a masters degree in Bull Shit and always happy to give my opinion on everything and anything.   ;)

Offline NoRiders

  • Posts: 729
Re: artists or designers
« Reply #2 on: Aug 25, 2018, 19:56:49 »
Hit us up with your drawrings and we'll tell ya if they're shit or not...promise :)

I know a good bike when I see one...and I've seen a few.

Offline kagraves

  • Posts: 152
    • Kyle Graves Portfolio
Re: artists or designers
« Reply #3 on: Aug 25, 2018, 23:32:01 »
I'm an Industrial Designer,  love to see what you are working on

Offline themotoworks

  • Posts: 97
    • the motoworks
Re: artists or designers
« Reply #4 on: Aug 26, 2018, 09:23:58 »
[/URL]
[/URL]

working on an enduro styled racer, I don't think I can conceal a radiator well in the small fairing so I might try to power this one with some of the newer air cooled motors instead of the 996 pictured, but I think I want to design a full fairing for a water cooled motor, maybe an 848 to keep it very light

Offline farmer92

  • DTT SUPPORTER
  • *
  • Posts: 782
Re: artists or designers
« Reply #5 on: Aug 26, 2018, 12:47:11 »
[/URL]
[/URL]

working on an enduro styled racer, I don't think I can conceal a radiator well in the small fairing so I might try to power this one with some of the newer air cooled motors instead of the 996 pictured, but I think I want to design a full fairing for a water cooled motor, maybe an 848 to keep it very light

Consider something built in under the seat, kinda like a snowmobile or the Tularis



You would need to design around it a little, but could be made to work with some proper ducting.

Offline Sderbyshire

  • Posts: 254
  • Into Sailing, classic Triumph cars and motorbikes.
Re: artists or designers
« Reply #6 on: Aug 26, 2018, 13:00:38 »
Or go with the 1100ds aircooled motor?

Offline themotoworks

  • Posts: 97
    • the motoworks
Re: artists or designers
« Reply #7 on: Aug 26, 2018, 14:58:15 »
the ds motors are quite nice, good head design etc.  I want the ability to run a liquid cooled engine because the 848 comes in 20lbs less than the 900ss I know well, if I could get the bike down to 265 dry and pushing 120hp, I think that would really draw a specific crowd, plus is could race in 750 class

Offline teazer

  • DTT SUPPORTER
  • *
  • DTT BOTM WINNER
  • *
  • Posts: 8786
Re: artists or designers
« Reply #8 on: Aug 26, 2018, 17:04:03 »
Radiator can go under the seat.  Check out the Britten for ideas.

Offline themotoworks

  • Posts: 97
    • the motoworks
Re: artists or designers
« Reply #9 on: Aug 26, 2018, 17:13:45 »
I looked into using heater cores to distribute the radiator area maybe I could put one under the seat one in the front fairing and one behind the front fender