collapse

www.dimecitycycles.com

https://www.townmoto.com/collections/vanson-leathers


www.restocycle.com

www.CITYLIMITMOTO.com

www.jadusmotorcycleparts.com

www.bisonmotorsports.com

www.speedmotoco.com

www.lostapostlejewelry.com

www.cognitomoto.com

www.sparckmoto.com

www.pistonsociety.com

www.steeltowngarage.com


Author Topic: CB360 project  (Read 636 times)

Offline akhengen

  • Posts: 11
CB360 project
« on: Sep 12, 2018, 14:06:16 »
New to forum. Figured I'd start a project thread. I've had a CL360 and a Cb360 since I was 14. Im 24 now. I'm using one frame and building it from the ground up to make one bike. I work as a welder and I have access to every tool I need to do what I need to complete this bike. (Cnc plasma table, cnc lathes, cnc mill, 160 ton cnc pressbrake, 10 foot shear,  etc.)

My plans are to dump as much money as I can into this bike.

Ill post what I've done so far. (Blurry photos, cameras broke)



Sent from my SM-G930V using Tapatalk


Online Sonreir

  • Moderator
  • DTT SUPPORTER
  • *
  • Posts: 10812
  • Oregon
Re: CB360 project
« Reply #1 on: Sep 12, 2018, 14:08:07 »
I'm in.
Sparck Moto - http://www.sparckmoto.com

Audaces fortuna iuvat.

1977 Honda CJ360 - Café SOS - Stage One™, Café SOS - Stage Two™
1976 Puch Maxi - APuchalypse Now
Suzi T500 Cobra Resto

Custom Gauge Graphics
Custom Wiring Harnesses

DTT Red, White, and/or Black 360 Club - Better than those Blue guys

Offline akhengen

  • Posts: 11
Re: CB360 project
« Reply #2 on: Sep 12, 2018, 14:08:20 »
Monoshocking it. Seat will be reupholstered. Custom electrical harness. Custom tail light. 

Sent from my SM-G930V using Tapatalk


Offline Sderbyshire

  • Posts: 253
  • Into Sailing, classic Triumph cars and motorbikes.
Re: CB360 project
« Reply #3 on: Sep 12, 2018, 14:12:23 »
This looks like it will be good !

Online jpmobius

  • DTT BOTM WINNER
  • *
  • Posts: 1200
  • where does this go?
Re: CB360 project
« Reply #4 on: Sep 12, 2018, 16:23:24 »
Get it up on its feet and check the rear tire clearance to the frame/tail light.
Mobius


On a long enough timeline, the survival rate for everyone drops to zero.

1973 RD350 Yamaha build  http://www.dotheton.com/forum/index.php?topic=66498.0

Online Sonreir

  • Moderator
  • DTT SUPPORTER
  • *
  • Posts: 10812
  • Oregon
Re: CB360 project
« Reply #5 on: Sep 12, 2018, 16:42:56 »
Loving the brass accents.
Sparck Moto - http://www.sparckmoto.com

Audaces fortuna iuvat.

1977 Honda CJ360 - Café SOS - Stage One™, Café SOS - Stage Two™
1976 Puch Maxi - APuchalypse Now
Suzi T500 Cobra Resto

Custom Gauge Graphics
Custom Wiring Harnesses

DTT Red, White, and/or Black 360 Club - Better than those Blue guys

Offline akhengen

  • Posts: 11
Re: CB360 project
« Reply #6 on: Sep 12, 2018, 19:07:46 »
Get it up on its feet and check the rear tire clearance to the frame/tail light.
Good point. I'll take some measurements on the bike I still have put together.  I moved the tail of the frame up about 5 degrees when I welder it together, so hopefully that'll help.

Sent from my SM-G930V using Tapatalk


Offline akhengen

  • Posts: 11
Re: CB360 project
« Reply #7 on: Sep 12, 2018, 19:09:40 »
Loving the brass accents.
Thanks!

Sent from my SM-G930V using Tapatalk


Offline akhengen

  • Posts: 11
Re: CB360 project
« Reply #8 on: Sep 14, 2018, 22:56:30 »
Had some time after work today. Built an electrical tray for under the seat. Got the monoshock but it ended up being way too stiff. Anyone know of any shocks that'll work for this bike? Around 11" eye to eye center lengths?

Sent from my SM-G930V using Tapatalk


Offline akhengen

  • Posts: 11
Re: CB360 project
« Reply #9 on: Sep 14, 2018, 23:00:27 »
Few extras

Sent from my SM-G930V using Tapatalk