collapse

www.dimecitycycles.com

www.cognitomoto.com

https://www.townmoto.com/collections/vanson-leathers

www.speedmotoco.com

www.CITYLIMITMOTO.com

www.jadusmotorcycleparts.com

www.lostapostlejewelry.com

www.sparckmoto.com

www.pistonsociety.com


Author Topic: FZR400 long bob chop chop  (Read 1223 times)

Offline bimjobabob

  • Posts: 40
FZR400 long bob chop chop
« on: Apr 03, 2019, 16:16:52 »
Started a thing... not sure where itís going.
Somewhere no doubt

Offline bimjobabob

  • Posts: 40
Re: FZR400 long bob chop chop
« Reply #1 on: Apr 03, 2019, 16:20:08 »
Nice upside down photo there

Offline bimjobabob

  • Posts: 40
Re: FZR400 long bob chop chop
« Reply #2 on: Apr 03, 2019, 16:25:43 »
Potential battery and shit box. big old shell in near vertical position?

Offline WhyNot

  • Posts: 1299
  • ~~~If it ain't raining, I'm riding~~{iii}?~~prost~
Re: FZR400 long bob chop chop
« Reply #3 on: Apr 03, 2019, 18:02:39 »
Nice, I'm watching, man talk about starting from scratch.

Cool.................
1975 CB750K5
1974 CB350F

Offline canyoncarver

  • DTT SUPPORTER
  • *
  • Posts: 3946
  • 'hacking is learning'
Re: FZR400 long bob chop chop
« Reply #4 on: Apr 03, 2019, 19:38:20 »
What can I say?  This I gotta see.  Rad motor choice. 

Offline JustinLonghorn

  • DTT SUPPORTER
  • *
  • Posts: 6666
  • No Purple Hearts, No Blue Ribbons
Re: FZR400 long bob chop chop
« Reply #5 on: Apr 04, 2019, 09:25:56 »
I am definitely on board. Chopper? Check. FZR400 motor (one of my all time favorite motors)? Check.

I can dig it.
I'm going to eat your brains and gain your knowledge.

Into The Sunset, CB750 build

TT500 the Animal


Offline bimjobabob

  • Posts: 40
Re: FZR400 long bob chop chop
« Reply #7 on: Apr 04, 2019, 16:30:05 »
Nice one chaps!
Cooking up a posh rear axle setup. Once thatís all finalised I can line up the sprockets and then think about motor mounts.
Iíll get some more pictures on the go when the axle is finished.

Offline bimjobabob

  • Posts: 40
Re: FZR400 long bob chop chop
« Reply #8 on: Apr 07, 2019, 11:39:45 »
Motor brackets....

Offline bimjobabob

  • Posts: 40
Re: FZR400 long bob chop chop
« Reply #9 on: Apr 07, 2019, 14:32:08 »
Ok so.... bare with me.
Of course cardboard isnít the first choice when it comes to ethanol safe materials..

Iíve been trying to come up with a solution to this fzr motor intake nightmare. I donít want pod filters because they suck on dicks.
I canít use the original airbox.
But I do need to use its original posh Venturi sex porn.