Quantcast
collapse

www.dimecitycycles.com

www.cognitomoto.com

https://www.townmoto.com/collections/vanson-leathers

www.speedmotoco.com

www.CITYLIMITMOTO.com

www.jadusmotorcycleparts.com

www.lostapostlejewelry.com

www.sparckmoto.com

www.pistonsociety.com


Author Topic: Cb250rs cafe  (Read 60227 times)

Offline andycafe

  • Posts: 1173
  • Northern Suburbs, Melbourne Victoria, Australia
Re: CB250RS stage 1, prep for painting complete...
« Reply #40 on: Jun 01, 2009, 06:59:30 »
and just a couple more........
« Last Edit: Jun 02, 2012, 23:30:36 by andycafe »

Offline andycafe

  • Posts: 1173
  • Northern Suburbs, Melbourne Victoria, Australia
Re: CB250RS stage 2, epoxy etch priming complete...
« Reply #41 on: Jun 02, 2009, 09:02:50 »
OK so ive laid down the etch primer on all the parts i can for the moment. ill let it harden off and then im going to start top coat procedures on the frame and swing arm as there going to be matt black, then ill move onto the parts to be gloss black and lastly the parts that are going to be silver, so all going well by Friday night i should have everything painted in there respective colors... ;D ;D ;D ;D ;D ;D
« Last Edit: Jun 02, 2012, 23:37:30 by andycafe »

Offline andycafe

  • Posts: 1173
  • Northern Suburbs, Melbourne Victoria, Australia
Re: CB250RS stage 2, epoxy etch primeing complete...
« Reply #42 on: Jun 02, 2009, 09:08:38 »
just a couple more pics ( i hope im not overloading every one with happy snaps? LOL) i must say that im looking forward to seeing some other color on this project other than GREY! :P
« Last Edit: Jun 02, 2012, 23:40:07 by andycafe »

Offline Hancock

  • Posts: 107
Re: CB250RS stage 2, epoxy etch priming complete...
« Reply #43 on: Jun 02, 2009, 09:23:42 »
Looking good Andycafe!  That primer looks similar to the stuff I am using on my cb450 project...Glasurit 801-1871 chromated 2 part epoxy.  I usually use Dupont Corlar epoxy primer over etched metal, but a friend gave me a gallon of this stuff left over from an airplane project.  I really like it although I am pretty sure it is stupid expensive compared to the Corlar I usually use.

Offline JRK5892

  • Posts: 9755
    • The Powder Pro
Re: CB250RS stage 2, epoxy etch priming complete...
« Reply #44 on: Jun 02, 2009, 10:23:08 »
man this is coming along great! the chorme looks bang'n! nice work man nice work
Joe
"your life is an occasion, Stand up to it"
www.thepowderpro.com

recent builds: Hd street bob, TX cafe, KZ bratt, Goldwing tour, bratt wing, st fighter, road king, vriago bobber, chop, FXD, 1200 sporty, 1200xl sporty, GSXR, Royal enfield.. and more

Offline andycafe

  • Posts: 1173
  • Northern Suburbs, Melbourne Victoria, Australia
Re: CB250RS stage 3, top and clear coats completed
« Reply #45 on: Jun 10, 2009, 07:28:48 »
Ok so here are some pics of the painted bits all finished, just need to pick up some new nuts and bolts and i can start strapping it all back together, all going well i should be able to start posting some pics of it getting bolted up!!!!!
« Last Edit: Jun 02, 2012, 23:43:10 by andycafe »

Offline JRK5892

  • Posts: 9755
    • The Powder Pro
Re: CB250RS stage 3, top and clear coats completed
« Reply #46 on: Jun 10, 2009, 10:08:24 »
nice work!
Joe
"your life is an occasion, Stand up to it"
www.thepowderpro.com

recent builds: Hd street bob, TX cafe, KZ bratt, Goldwing tour, bratt wing, st fighter, road king, vriago bobber, chop, FXD, 1200 sporty, 1200xl sporty, GSXR, Royal enfield.. and more

Offline andycafe

  • Posts: 1173
  • Northern Suburbs, Melbourne Victoria, Australia
couldn't wait to start reassembly  :
« Last Edit: Jun 03, 2012, 00:13:42 by andycafe »

Offline 88

  • Posts: 49
Slow down.....I feel sick

Offline monteboy84

  • Posts: 75
  • Rowdy Rookie
Damn dude, looking slick. I love your garage by the way, I think you need some vintage bike-related signs to hang on the walls  8)

-matt
"Due to current financial constraints, the light at the end of the tunnel has been turned off until further notice."