Recent content by BERMUDACB

Hello again All, I managed to find online a few ATC 185 and 200 cylinders that will fit my 1984 XL/CB 125 with the bottom half bored out for the bigger sleeve diameter, however i need to find pistons (possibly oversize) as the bores are worn and not in the best shape or can I resleeve them to...

Try Wichanchai Boonsang <wboonsang@yahoo.com> Supplies Racing Boy rims from Thailand. I've had good results to 110 MPH.

Hello, I'm hoping someone else has swapped out a CB single cylinder motor with an XL single cylinder motor and had tabbed a top motor mount? It doesn't seem particularly hard to do but just checking to see if someone else had done this.....

Thank you for your quick response! I should have made myself clearer, I have a 12v motor/gauges (although its proving to be another nightmare to get the bezels to mount the xl speedo/tach to the cb triple tree) harness (and hopefully all the bits needed; rectifier/coil/ect) but have CB 6v...

Hello All, I've made the mistake of liking my Honda CB100 soooo much I decided to build another....but different! Started with a Honda CB100 frame from 1973, added 19in rims since I'm a big fat bastard, some chrome, couldn't find a 1/2 decent CB100 motor so I went with an XL 125. I had a CB...

Hello All, I've made the mistake of liking my Honda CB100 soooo much I decided to build another....but different! Started with a Honda CB100 frame from 1973, added 19in rims since I'm a big fat bastard, some chrome, couldn't find a 1/2 decent CB100 motor so I went with an XL 125. I had a CB...

Hello All, I'm trying to find anyone that would rebuild a Honda CB125/100 single with upgraded, race ready components? All I can find (when I can!) are 40/30 year old maybe running donor motors that would need a total rebuild anyway as seals/bearings are shot. Thanks in advance, David

Thank you very much for the link. I am hesitant to buy a 40 year old motor sight unseen as even in running condition at best I will have a fairly tired engine. I was actually hopping that someone could point me in the direction of a shop or individual that would rebuild a donor motor with new...

Hello and greetings, I'm looking to purchase a rebuilt 1970's to 1980's era Honda CB125/100 complete motor. My motor is completely shot and not worthwhile to rebuild (too many cracks in casings and all seals and most bearings gone). I've got a beautifully rebuilt rolling chassis missing a...