Recent content by Captainrob

Nice clean bike. How's it sound with those pipes?! Just turned the heater on in the garage! Ill see if i can do pegs, battery tender, rear exhaust bracket, and i need to figure out what carbs are on my bike so i can get rebuild kits. Is that a Benji tank/seat?

Might get to this today and I picked up some pieces that might make a cleaner looking and easily available brake lever stop than what I made. If it works I'll post up the part# and what they are. Maybe they could be included in kit.

You just use a cutting wheel for quickest peg decapitation?

It's where the peg pivots that it's kinda digging into itself. Yup, the kickstand is part of the stock foot pegs that are attached to a bar that goes under and across the bike connecting them.

linkage to rear brake. Maybe it'll work better if I flip the arm up? Seems good the way I have it now, but haven't ridden it yet. Pieces in kit have worked fine. Only problem I've ran into so far is that one of the pegs doesn't swivel easily and when I took the bolt out to separate the peg...

It's been awhile since I ordered mine. I have a CL350, but it had CB360 pipes on it and the rearset arms wouldn't clear the pipes when pressed down. I just picked up a used Jardine 2-1 exhaust that goes under the frame mostly so now the rearsets will fit. BUT NOW I see that the kickstand is...

What's up Sal!! Decided to get back on here to research a little bit for the final stages of the 350. Got her running around the neighborhood and need to put on a brakelight and plates/INS and see how it runs at speed with these pods. BTW, If you're up to heading my way (gvr area) on a...

Building it from the engine up you'll definitely know the shape your bike is in regarding ALL it's components. Just saw a bobber style militaryesque bike at the biker build off here at bikefest in Las Vegas and he had shiny darker metallic paint on the normal parts that get painted and a...

Good job on the seat and great idea. Hmmm, now if i can find a sweet brown leather one at the goodwill. My last build I used the seat bottom of a folding chair since the bottom was already wrapped in black vinyl...... Did you try running it with the stock jetting and pods. I have a CL350...