Recent content by CBrat750

Hey thanks for the heads up! I just stumbled onto that site. Yea i know its an odd little bike but i figured it couldnt hurt to ask around

Hey guys so I'm piecing together a 74 rd200 it has pod filters but not tuned for them. But the op did have the stock air box but the intake boots are shrunk and no longer rubber. So I'm sure some one has a set laying around on their parts shelf they could be will in to part with. Please pm me if...

Hey guys so I just picked up my first 2 smoker in the form of a rd 200 it was a project bike of someone's but I got it all together and fired up last night. Down side is the carbs are leaking out of the over flows. So I cleaned everything and made sure the needles are seating well. But does...

Hey guys so I found out the hard way that the mounting tabs are different on the K-F-C models. I had a C and these are for a K. So I'm hoping someone else could use these. The paint is in pretty good shape decals are starting to peal around the edges though. The RIGHT side has all the tabs in...

Ha Scooters are where i started and if you want to go custom a Ruckus is the scoot for you. The down side is just an FYI those gy6 (Chinese 150cc) motor are junk. They quality is very poor and it will break..its not if its when. Here is my ruck though still stock 50cc motor, well with a bunch of...

Hey i have one on my parts motor. Ill pull it off and test it to make sure it works but i know i got one. I was told the motor had like 28-30k on it though.

Thats what I figured about the carbs. Did a bunch more reading and found that i would need the older style. I think i found my christmas present to myself! I love the old school side carbs way better anyway.

I found a good deal on a set of gsxr600 carbs but the bowls on them are on a slant. How would they work since my intake runners are flat. Wouldn't it cause the them to flood or do I have to get some custom intake runners also

Re: 79 cb750 carb floats on a 80 (update) Ok so after tweaking with the carbs a bit yesterday turns out they need more work then I thought. The little springloaded pin in the valves are all frozen. One of the floats was out of wack like I thought. And one of the bowl over flow tubes was...

I will give that a try on Sunday when I get some time to work on her again. Reasons why I love this site. Members always lookin out for another!

Valve is all good held the valve in with my finger then turned the gas on and not a drop. So that checked out. Also the float is soild with no leaks. But some one was definitely in there before. The float pin was all chewed up smoothed that all out hoping it was the problem. But to no avail.

Bump Day!

Hey guys I know this sounds like a dumb question but bare with me. After a bunch of frustration with my carb overfilling, #1 on the rack, on my 80 cb750C I have come to terms that the float is out of adjustment. Well being one of Honda's better ideas the C's have plastic non adjustable...

Hey guys so I found this '80 CB750F for a deal I couldn't pass up. Its a 1 owner bike with title and all the documents from the dealer and tool kit. It does have a few tasteful mods done by the OP. (low bars and 4-1 exhaust) other then that its an all original bike. But the biggest down side is...

http://philadelphia.craigslist.org/mcy/4066001664.html Hey guys found this 1 owner bike and couldn't pass it up. But of course space and the wife says i cant keep it. So up for sale she goes. Im willing to start at 1800obo for DTT members. Never shipped a bike nor really know how to go about...