Recent content by chillinfellow

are you wanting to splice in new male & female ends or just replace the female your showing with the identical pattern ?

looks like a 72 camaro base model (sport coupe) factory color: Flame orange with the tan interior Nice job on the bike so far

thanks to the many that made this day possible !!! cheers !!!

First try running with rerouting the stocks like Carnivorous said, worked fine for me, threw a set on on 78 kz 400 and worked just fine, took a little putzin around for routing them but a lot easier then switching them out.

Had similar experience avon tires too, the bead was uneven, was more hop if anything. brought it back to who I had mounted them they corrected it, believe they ended up having to use a bigger tube and pump a ton of pressure into it to get the bead to seat proper / evenly. been fine since put...

Re: 1957 or so Feathercraft Ranger - model to be determined sweet pick up, been snooping around for something similar too. 8)

Awesome mini Doc, Rock-on Stan Dibben !

stumbled onto this video https://www.youtube.com/watch?v=5RVOoNh4ICM

Have a 78 kz 400, (b1) I had ordered some new turn signals totally spaced out that the existing fronts were a dual filament bulb & socket and had ended up buying single filament ones, would like to try to have them function like a dual ? I know I could use them as turn signals only, but would...

Have both Pep & Napa in area, yes complete

Have a 78 kz 400, (b1) I had ordered some new turn signals totally spaced out that the fronts were a dual filament not a single filament like the rears, would prefer to still be able to have them function as a dual, I know I could use them as turn signal only but would like the running lights...

yep lots out there, here's a ebay link for some http://compare.ebay.com/like/261131147267?var=lv&ltyp=AllFixedPriceItemTypes&var=sbar

I use one, never a issue, usually a very slight amount of play from the snap button alignment slots, not sure why it would be so loose unless a button broke or its not snapped on properly ? maybe remove it and snap it back on ?

Greetings from another St Paulite, looks like nice lil Gs you snagged 8)

How about notching out one or maybe two strips on the steel top so you have room to slide clamps up to the angle.