Recent content by CJM37

Can I use a 1976 CB750 Automatic head on a 1976 CB750F? Everything seems to match up Sent from my iPhone using DO THE TON

It’s 72.5 mm long and 16.7 mm at the widest point and tapers to 12.8 mm with a 5mm hollow running thru the length of it Sent from my iPhone using DO THE TON

Thanks for input guys best I can tell it doesn’t belong with the engine just something that got mixed in my parts I hope. Sent from my iPhone using DO THE TON

Sent from my iPhone using DO THE TON

Rebuilding a 76 CB750. This part is in with my engine parts. I have no idea what this piece is or if it belongs with the motor? Can anyone identify this part? Sent from my iPhone using DO THE TON

Rebuild a 76 CB750 and I have this part in with my other engine parts and I have no idea what it is? Can anyone identify this part? Sent from my iPhone using DO THE TON

Have a 1978 CB750 with a dyna S ignition. Had no spark on the 2-3 stock coil so I installed new dyna coils with a resistor pack. When I timed the new coils the coils the 1-4 timed correctly but when I went to the 2-3 coil the timing light stays on all the time? Purchased a new set of dyna coils...

Thanks a lot. Pulled the little spring and ball out of the accelerator pump cleaned that and cleaned the circuit. Problem solved. Sent from my iPhone using DO THE TON

I bet you are right I rebuilt the pump but didn’t clean out that pinhole. Thanks a lot I will try that if I can figure out the best way to clean it Sent from my iPhone using DO THE TON

Have a Honda 78 CB750 that starts great after it’s warm but is almost impossible to start cold. Carbs rebuilt and adjust. Top end rebuilt. Any ideas on what the problem might be. Any help is appreciated. Sent from my iPhone using DO THE TON

Have a 76 CB750 SS. I found a deal on a set of CBR wheels Im thinking of buying.How much trouble would I be getting myself into fittiing these wheels to the bike? Is there a similar wheel that would be a better option?