Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
We noticed you are blocking ads. DO THE TON only works with community supporters. Most are active members of the site with small businesses. Please consider disabling your ad blocking tool and checking out the businesses that help keep our site up and free.
I picked up a set of used fork lowers for my rd400 that were in pretty bad shape. Cleaned them up nice, but the inside slider has quite a few scratches. As long as the fork tubes are good should this cause any problems?
Didn't read this right the first time I replied. Sprockets are from sprocketspecialists.com. Chain is a DID erv3, use to have the non oring ert2 chain but that stretched like butter. Economy Cycles sells the spacers for the 520 conversion.
I did the 520 conversion by adding two wheel spacers in the rear, and two lock washers on the front. Went up one tooth in the back, so 17x39. Some people drop the front to the 16, but I ride a lot of freeway.
Yeah I love them, don't think you can get a better street tire for the price. The front tire pictured is a 100/90 which they discontinued, so I have a 90/90 ready to go on with the new brake, I'll let you know how it goes.
Thanks guys! No switch switch gear(if you're referring to the kill switch and controls). I put a toggle switch in the headlight bucket for the lights and drilled a hole in the side of the bucket to run the key housing through. I like just having a key because with the kill switch I would forget...
Thanks for all the kind words. I've had this bike for some time and put a lot of sweat, love and tears into it and I couldn't be happier with her.
Got the itch to tinker some more, so she is back on the stand and I should have some updated photos in two weeks.
Re: '76 RD400c -- 2smoker "Ginger"
Looking good stache! You figure out the fuel leaks?
I'm 6' tall and I like the bump of the pad to start right at the shock mount. Gives a little room to slide back and tuck for high speeds.
I know someone who had a body shop match the chappy red and it was...
Re: My Suzi T500 Project (The Build Up Begins!)
I can't wait to see this, it's coming together so nice. Good work John.
I've used Mop n Glow and it works really well.
Re: '76 RD400c -- 2smoker "Ginger"
I just know it works for me and was recommended by a trusted two stroke mechanic. Don't think it interacts with the gas just keeps the brass pressed all the way down. You sure it's not coming out of the fuel line? I had fuel leaks with 1/4" (stock size) line...
Re: '76 RD400c -- 2smoker "Ginger"
When the nipples on my carb came loose I pulled them out coated them in red lock tight, then pressed in and let dry. Always worked for me.
My carb leaked the same way through the gasket. Mine were warped from being over torqued over the years. I tried a new...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.