Recent content by dgguia

Other than that bad news I rewired the motorcycle for kick start only. Previous owner told me that it didn't work and he always kickstarted it anyways so why not I thought. I found a diagram on google of a simple wire harness. Always on headlight, no turn signals, tailight, stator, rectifier...

Keep up the great work Sent from my iPhone using DO THE TON

So I went home tried to kickstart it and nothing I checked for spark and there is spark on the left the right seems kind of weak. I have fuel coming out of the pet cock I just don't know how to check if the fuel is getting into the carb or not. By the way this bike is kickstart only no more...

My 1974 cb360 café project So here is tear down of when I bought it back in January or February Sent from my iPhone using DO THE TON

Ok I get wat ur saying I'll give it a shot tomorrow thanks Sent from my iPhone using DO THE TON

This is going to sound dumb if u don't want to reply I get it but when u say prime? Exactly how do I do that? if not I'll look into it tomorrow thanks again Sent from my iPhone using DO THE TON

My 1974 cb360 café project It's been stretched 5 inches. As for the seat it's not mounted just placed. I had to fab up some brackets to have it sit higher up. I'm also looking into getting cb750 shocks there slightly bigger than 340mm which I think would be fine I'm at 320 if I'm not mistaken...

One thing I actually just noticed was this axle for the front has two washers and mine does not. I'll take a look it at it tomorrow, but I was pretty sure the spacer simply slides in till it can't go no more than the nuts just gets screwed locking everything in place essentially. I have to...

Sent from my iPhone using DO THE TON

1974 cb360 Sent from my iPhone using DO THE TON

My 1974 cb360 café project Forgot to mention I changed that around I noticed a picture on google but even then I'm still having the same issue I think it's because of how fat of a tire. I read that the bike is suppose to be 3.50 by 18 this is 4.50 front and back as for the spacers I bought one...

Thanks man I've had nothing but resurrections since my first car Sent from my iPhone using DO THE TON

I do however have a couple of questions Why does the front tire rub more to the right and not centered And I'm new to all this carb stuff the bikes been sitting going on two years now, should I do a rebuild? He also mentioned installing bigger jets? not really sure what that means but any help...

Picked this bitchin bike for 500 bucks off an old friend with to many projects on his hand. He told me that the mechanic said all it needed to run was a coil pack. So I replaced both from MikesXS, I figured while I'm replacing that I should replace the condenser from common motor and sparkplug...