Recent content by freerideordie

A MOTHERF#^$^$*$ 2ND FOR ME !!!!!!! This had better not be f@cking trend on this pos.

A first for me, pretty frustrating, better it break while loosening the bolt, than while riding....

Sure did, I can rustle up some drawings if you want, I based it off some plans I found here, http://classicbroncos.com/rotisserie.shtml , and modified it to be more adjustable, as I want to use it for other vehicles in the future, namely the '81 911sc my father left to me a few years back. So...

Thanks Jimbo, time is fleeting and there is so much to get done. Probably going to be slowing down on the scrambler here soon....gotta get started on the Beemer and the gs650... considering both bikes now have deposits put down on em. I wanted to get the braces/mounts finished up b4 take her...

Forgot one

Rear shock mounts done. I'm raising the back end of the bike for a little more of an aggressive riding style. Can't call it a scrambler if she can't scramble, so working on some frame/swingarm braces that should knock out some flex. Haven't decided on extending the swinger or not, but I will...

Seat mold

^ it is the the smooth-on VII FR flex foam. It's a little bit finnicky, wouldn't really be worth the work unless you were planning to make quite a few. But the rebound/density is perfect, like a sea-doo or MX seat.

Made a lil video of pouring 2 part foam, still workin some bugs out, but came out pretty good for the first go round.

https://youtu.be/R5XdVppMlzI

Re: Cl350 Scrambler Got the subframe almost all welded up Ive removed the stock tank-mounting points in the rear and will weld a back on to the tank to not only clean up the look, but will provide a mounting point for the seat pan, similar to dirt bikes. I need to finish up the seat...

Re: Cl350 Scrambler Sometimes it hurts to chop a frame, this is not one of those times. The stamped steel looks awful and had to go. bike up on the lift. I just finished this table/lift and am loving if. Used a HF 8ton air/hydraulic jack, 2x2 tubing and a 3/16" steel top. I added...

Been a long time since I posted on here, pretty much just gave up since photobucket essentially deleted any photos I had. Anyway, I have too many projects but have gotten back to being responsible and posting some progress. Picked up a pretty clean and running 72 cl350 from a buddy of mine and...

ive got a spare cnc'd brace that Ron (Ron's Cycleland) gave me....I might be willing to part with it.

Thats what i thought....changed them, changed the stator,coil, reg/rec, battery, solenoid....only thing left is the starter. It's weird, checked with a multimeter at 5000 rpm plus, its getting 14.5v. But after even a short ride, turn off the bike, try and start it, nothing....ANNNND of course...