Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
We noticed you are blocking ads. DO THE TON only works with community supporters. Most are active members of the site with small businesses. Please consider disabling your ad blocking tool and checking out the businesses that help keep our site up and free.
Oh yes, this was just the start of the build last year... I have at least 40 more pictures to post. Thanks for the kudos, I was very pleased with Mega Cams. We decided to just clean up the current cam this time around, I didn't want to mess with things too much the first year out.
For our...
Found lots of lovely gray goop being used as the valve cover gasket, and one of the pistons had experienced a valve drop sometime in the past that was never taken care of, so I gently worked it over until the top was reasonably smoothed out.
I then sent the pistons off to Swain Tech coatings...
The engine was taken out and a full top end rebuild was done. I discovered several things: first of all, someone LOVED safety wire. The drive chain was being held together with safety wire, and there was crazy all over the valve cover bolts.
I got the bike in February of 2013. Once I started riding her around though, I started to find some problems. First, she was hard to start, and often would lose a carb due to sticking.
Then one day a spark plug popped from the head on a high speed run, stripped completely out. I figured it...
I've been racing at Bonneville since 2012, and last year bought a beautiful 1969 CL175 from eBay to enter in the Classic racing class. Here is her story...
Below is how she looked online, and when she arrived. A vision of Honda twin splendor.
Thank you, man. I re-read the past posts on this project and found the part # that Theboxrules posted. Thank the gods of speed! Ordering 6 of 'em today.
Okay, I'm stumped. Currently doing a bolts-up restoration on my CB175 race bike, and I can't find bronze bushings to fit my swingarm. I saw that TheBoxRules bought some for his "Anna" build a couple years ago but I am out of luck finding a similar source.
Any help is greatly appreciated...
Hey there! Not sure if you remember after all this time, but where did you get those bronze bushings? My CL175 project is at a standstill until I find some. Hell, at this point I'd take anything that fits...
- Jaylin Billig
CL175 "Hattori Hanzo" Bonneville LSR record setter 2014
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.