Recent content by kendo57

Well the weather has finnally improved so managed to take the bike out fot its first ride. Everything seems to work well and was an enjoyable ride. Only problem was a leaking carburrettor which seems to have a split drain tube in the float bowl so i have soldered the tube untill i get a new one.

Before , minus engine After

I cannot believe i missed that, luckily i have removed them and switched them round . I feel stupid.

Thanks for the good comments , its winter here so will be a while before i get the bike on the road, too much salt down now. Heres a final picture with the Honda tank badge, hopefully i will post some more out on the road next year.

The rattle can paint is all about the finnishing. Paint the scheme you want then put a few clear coats on, leave well alone for a week or two for the paint to harden. Then i carefully flat off with wet 1200's paper, avoid any edges, you can feel the surface smooth out as you do it. Keep wiping...

Its virtually complete really but i have given all my money to the dentist recently. Just need a few parts,, Seal kit for the M/Cyl, front brake hose, two fuel taps and hoses, number plate and probably a new battery. Here are the latest pics

Made a small housing for the idiot lights, first out of cardboard, i have gone through a few cereal boxes in this build. Then out of aluminium with some stainlees sheet i had. Fitted the lights and wired up Also made a fuel container so i can start the bike without a tank. Used an...

Thanks for the good comments. I am in the UK and just bought some clear from the local Auto Spares shop, nothing special , i think it was made by Holts, I am preping it for paint at the moment, its had a few dents in its life so i am just trying to get it reasonable without too much filler...

Quick update, nothing to write as i am just re building what i have already done but with everything painted.

Had a mixed day today, picked up the frame from Tripple S and they definately do a good job. I was expecting to have to get my taps and dremel out to clean off powder coat on the threads and splines but they have taken care of everything. I don't think i will have to clean up anything when i...

Yes rattle can, just put a good clear coat on and then leave it for a week to harden. Then its just a case of buffing the paint up with fine cutting paste and then polish.

OK, should be able to pick my frame up from the powdercoaters next week. While that is being done i thought i would do some paintwork of my own. There are only two items, mudguard and seat unit, although i might do the tank later. The tank is such a big battered thing ,it will be a project on...

Now i was really pleased with this seat cover but i thought i could improve it by fitting some piping along the back edge. Bassically i messed up so had to cut the piping off and try again. I messed up again and did not have enough material left to try again so it was binned. Mark two was made...

Seat unit, this has tried my patience over the last couple of weeks. This is the underside of the seat unit , i have bonded some Mdf to it so i can mount the fixings and also screwed a Mdf extention to the front to lengthen it .You can also see two plastic mounts which will hook under the metal...