Recent content by need4steed

I just picked up a 71 cb350 with 11,000 miles on it. The nuetral light is not lit and the bike will not start. Will this bike not start without nuetral switch working? I got the bike to stumble with some starting fluid, but the green light was on. I cant get cant get it to come back on or...

i didnt get anything about the motor, and exhaust. where are you located. thanks

Carbs? how much to ship to tampa FL. thanks

and how much for the full exhaust system.

how much for the gauges, and if the carbs dont sell, how much. where are you located. if close to tampa FL i will take the motor too. how much for it. thanks

i was able to get the screw out. Thanks for the heads up. I have some things to trouble shoot now. Will report back. and thank you for the help.

FOr the wires, I cute them both back already to make sure i have nice clean wires exposed. I will adjust the slides so they both open exactly the same. Should i use the one on the right(good idle) as my control?

when she is firing, its black and a little wet, and the right is black too but dry. I have not switched the wires. I broke one of the intake mounting studs. anyone know where to get one? How do i sync the slids/ adjust them. by the top of the carbs where the throttle cable goes in?

i have turned the internet insideout and have found lots of things to check, but nothing has worked. My cb175 will not idle on the left side. the bike is stock and has nothing modified on it. Here are the settings. The idle screw on the right side is 4-5 turns out and idles great. The left...

I would like to place my order please..... ;D

i have done that mod. here is the picture as she sits now. You will have to make tabs for the front and a bracket for the back. I will try to get you some pictures of how i did mine. shoot me your email and i will get you some pictures.

Re: 72 CL350 Build - This is my first so be gentle WNTITAL, i have a extra one for you. PM me your info and i can get you that part for the choke no problem.

Right now I'm at 3 turns out but it could be that I was tuning with just straight headers and no air filters. I was just tuning and not riding yet.

Does anyone know the or can confirm the stock mixture screw setting? I was able to find .875 turrns out. is that correct? thanks

This bike is badass. I am going to use this as a reference. Do u know what your mixture screws are set at?