Recent content by plesko

One of my stock plug wires bit the dust and I'm replacing them and ordering NGK Resistor Caps from DCC. Can I fit a 45 degree cap on all cylinders or do I need to get two straight ones and two 45s? link...

I concur - give link credit... plus they might have some other good stuff for us to see :)

I'm considering the Shorai LFX14A2-BS12. It's kinda pricy but at 4.45"w x 2.28"d x 3.5"h and 210 CCA it looks like a good, small replacement for the stock battery. I'm not really sure what all the other numbers mean, but I'm hoping the only other really important number is 12v :) I'll still try...

Yeah - Good info - Thanks for the reply. The swingarm/frame mounting is still under consideration depending on the size and how I think I can hide it best. I'm keeping a longer seat (for two riders) so a cowl isn't going to happen. I might still be able to get it under there depending on the...

a couple more pics

I got the carbs rebuilt and replaced a couple of one-off screws that someone had previously substituted when they lost one. My girlfriend was confused by my OCD need to replace all the screws in a set with identical screws when I found one to be different (replaced all float bowl screws so they...

I've seen some other threads about batteries and sizes but haven't seen anything super definitive... Do y'all run smaller than spec batteries? What are the tradeoffs? I've got a 74 CB550 that I want to relocate the battery to a custom box on the swing arm but I need to figure out a battery first

I decided I would be responsible and attack the mechanical issues (or future mechanical issues) first - ordered a gasket set and 4 carb rebuild kits to start off with. Decided I would throw in a set of clubmans to hold me over until I spring for clipons. The Clubmans went on before I ever...

Did you put the battery under the rear seat cowl? It looks too small but I don't see it anywhere else

I withdraw my question. I was continuing to look and noticed front drum brakes and on disc brake bikes a small reservoir. DCC has a smaller setup it looks like...

I've seen pictures of bikes with really simple, clean handlebars - no master cylinder with the brake lever. How is it relocated? Is there a set of parts I'm missing that makes that possible?

Thanks y'all. I'll look for a donor for the head and cam. I've never bored a head - difficult? Is there a walk through anywhere? In the meantime I'm gonna get this all cleaned up and the compression correct. I'll stick to some bolt-ons and aesthetics for now - at least until I am more...

Holy shitballs - those look fantastic! How long did that take you?

Paint is gonna happen but not sure exactly what yet... I already mentioned black on the frame, engine, and a bunch of the components - thinking about repainting the tank green (as homage to the original) and adding an offset stripe on top in a leather-brown color to match the brown leather...

I haven't been to MotoLiberty - I'm gonna look it up - Thanks! I'm a part of the Facebook group. I can't wait to make it out to drinks with those guys. It is a clean bike but has a bit of rust and a head gasket leak. I'm not used to riding so upright - I've had a CBR600 and a Gixxer 750 before...