Recent content by Rbabros

Have you tried the 3m neoprene 98 spray adhesive? https://www.homedepot.com/p/3M-18-oz-Neoprene-98-Rubber-and-Vinyl-Spray-Adhesive-98-24/206387392 I might give it a try simply because it's mostly colorless.

I'll have to look into the neoprene adhesive. Do you have any experience with it? I decided to try the super 77 based on online recommendations from foam/rubber manufacturer. I'm not putting vinyl on the seat. Just running the neoprene foam by itself.

What kind do you use? And will it hold the foam down if it has to wrap around/conform to tricky curves? I keep having an issue with the foam lifting on the corners. The foam is pretty flexible due to it being neoprene, so as long as that velcro adhesive sticks to the foam then it should do the...

Neoprene seat foam to seat pan (fiberglass w/ gloss gel coat). The seat pan has some pretty tricky compound curves so the 3m super 77 didn't hold on those corners of the foam and it just lifted. Even after having continued compression for over an hour.

Any particular brand? I bought some of the 15 lb "velcro" brand for my battery and that stuff was very sticky. I was actually thinking about using it for the seat as well, but if you know of something that will hold better on tight curves, that be great! Thanks.

I purchased some black neoprene cut to fit seat foam with adhesive backing to attach to my fiberglass seat with gloss gel coat. Long into short, the factory adhesive backing was about as strong as post-it glue so I stripped the adhesive off of the foam. I've tried using 3m 30lb double sided...