Recent content by Rmitch

Looks like there are aftermarket indicators and the old relay still on your bike? If the indicators are LED then you'll need a new relay to slow down the signal rate. The lights staying on and not blinking may actually be the LED blinking so fast it looks like its just staying on. I had the...

Re: A Pile of Rust & Cobwebs - 1979 Kwaka Z250 Twin - Made in Australia! Hey mate, Good work coming along! Wondering if you are keeping the stock air box? I have the same bike but the boots running from the air box to the carb are shot and I'm missing the right angle hose going from the crank...

No worries, it's really easy to do- just be careful around the diaphragm when changing the needle height, and the posts that hold the float. The sizes will be stamped on the actual jet. The smaller number in this carb is the pilot and the larger the main.

Wondering which mechanic you went to for the RWC inspection? I was finding it hard to suss a mechanic to RWC custom bikes

Hey mate, do you have the stock jet sizes? I rejetted for the exact same set up as you pretty successfully. I think it was a 130 main, 52.5 pilot and raised the needle 1 or 2 notches, then final adjustment of the mixture screw. It was a while ago so I'm not 100%. It worked well for the...

yeah it's the one. Luckily the guy that brought it was just gonna put it on club rego so no need for a garage RWC. It wouldn't have passed the way it was I don't think

Yeah for sure mate. I was in the hardware store and saw a ball pein hammer and some body filler and thought- fuck it I'll give that a go

I'll be following this one for sure. I have the exact same bike that I'm doing up at the moment

Ya need a balance charger for those lifePO4 cell type batteries. I have one if you need to borrow it to charge it up mate. I have no idea how to use it tho, I bought it for an Antigravity/Ballistic battery I was going to buy but never did. You're in Melbs? I'm just in Brunswick. I've also...

I used a good contact adhesive to stick my cover to the pan on my sr250. Holds hella strong

Re: 1977 KZ650B1 ****NEW DANMOTO ACEWELL KNOCKOFF**** Thanks for this! and the pic too. Looks like mine is finally going on this weekend then. And thanks rocketman also for PMing me the same solution

Re: 1977 KZ650B1 ****NEW DANMOTO ACEWELL KNOCKOFF**** Sorry to drag you all the way back to page 2 of this thread, but just wondering how you ended up placing the magnet for the speedo sensor? I have the same speedo and trying to suss where to mount this thing. Great build by the way!

where oh where did you get those mufflers?

maan this is rad, I've been keeping an eye on your eBay auction!

Great build! Do you remember what jetting you ended up with? A friend of mine has the same bike and is wanting to run a pod.. Cheers