Recent content by Scheidty

Hey! Great looking CB. I had the same issue as you and was thinking carb or electrical. Eventually I checked the valves which were beyond tight (measured when cold) and readjusted to spec. Now the bike doesn't die when idling (when completely warmed up/hot). Hopefully this helps!

Hey Viet I was wondering what size of screw would fit in the toe peg hole? It seems to be a very fine thread but I couldn't match it to any of the bolts at the hardware store. I'm going to modify the brake arm so I can flip the arm upwards and see if there is any difference.

Re: Pjkf: Two-Up CL350 Cafe "Variant" Love the seat design! The colour scheme fits the bike as well. Are you planning on mounting the passenger pegs to the swing-arm? I used the passenger peg mounts to mount my rear-sets as well so looking for another location/method for the passenger pegs.

To be honest I have no idea! Haha! I think it's just a matter of adjusting till it all works out. Part of my problem is that this was my first time installing rearsets so it took longer than expected. Also, I didn't realize that both ends of the rod were threaded, so once I realized that both...

Got the bike to shift up and down smoothly. It still takes some effort but I think that's the nature of the beast here. It's a lot easier when the bike is warmed up and in motion. The rearsets are easy to install but I found them difficult to adjust because of my novice abilities. I'm going to...

Made some progress today. I can get it to shift up and down, but the bike has to be rolling forward (or backwards) for this to happen. It also takes a lot of force to change gears. When I attempted to take it around the block I managed to get it into first but couldn't upshift to find neutral or...

Hey. Tried different combinations of the shift linkage tooth. Right now I can get it to shift down in most of the configurations but the upshifting continues to be a problem. I just can't seem to find the sweet spot where the upshift and downshift meet. Right now I can't even get it to upshift...

Rearsets arrived in the mail today (16 days, which is what I was expecting). I manged to get the brake set up well but I'm having trouble adjusting the shifter. The shifting with stock linkage was "temperamental" so this could be a little tricky . I manged to get the shifter to shift down or up...

Just ordered a set of these off of ebay. I'll let everybody know how long it takes to ship to Canada and how well they work on a CB350. I didn't bother with the discount for members, so not sure how that works. Either way, at 115 bucks (including shipping) they seem like a good deal and should...

Thanks for the replies guys. Currently mine are 25'' tip to tip. I fitted the controls and everything feels good. I have to wait for spring before taking it out for a ride and then I'll know for sure. Thanks again!

Hey everybody! Was just wondering what some of you guys were running for handlebar lengths for clip ons. There are a lot of topics about running cables, diameters, etc, but not a lot of discussion on what an appropriate length might be. I'm looking to achieve a balance between comfort and...