Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
We noticed you are blocking ads. DO THE TON only works with community supporters. Most are active members of the site with small businesses. Please consider disabling your ad blocking tool and checking out the businesses that help keep our site up and free.
Figured out the yellow/red wire, I wired the green/red into the silicone rectifier that connects to the neutral wire teal/red I believe.
All my loose wires have homes and to the best of my knowledge are in the right spot however I still have no freaking spark. So tomorrow I will make a diagram...
That is exactly the wire I was talking about. I am wiring up an M-unit so everything is different and very much a pain in the butt. I'm trying to do try number two right and making sure all my little wires have a home. Thank you for the quick reply .
I am wiring my 1981 CM400T, The first try didn't produce any spark so I am redoing it all. I have a yellow and red wire coming off of the starter solenoid. Where does that need to go? I followed the schematic and it shows it going into the engine switch under MG??? I have wired an m-unit and...
This is fantastic. And just in time because like you said powering the black and white wire does not work. Now. It makes sense as to why the muint was telling me something was not right. I will get a relay ASAP and hook it how you said. Thank you again.
Sent from my SM-G930T using DO THE TON...
Ok thank you, that's the one that stood out on the schematics so I believe I have a problem elsewhere. Time to troubleshoot again. Thank you for helping me get over that hurdle!!
Sent from my SM-G930T using DO THE TON mobile app
Need a little help.
I have no idea where to hook up the ignition output lead. I have tried it on many wires dealing with the ignition system and I am getting no spark.
Second question. I am utilizing a 4 button switch setup. According to the manual that is configuration E. So do I simply wire...
That's exactally what I was looking for it looks so clean. I did find one on ebay for like 45 bucks it looks ok but not as sleek as the one your doing. looks great
I ended up going with some from cycle gear but they didn't have what I really wanted I ended up getting a Bridgestone Trailwing in the back and Shinko tourmaster up front. Not really what I wanted but I needed tires. I think I will be changing them soon planning on getting different wheels but...
I'm pretty sure my skill level wouldn't make it that nice. But I didn't realize that these were more common on vintage bikes. I will have to change my search settings and check that out. Thank you
Bought this bike from my best friend in 2010, parked it in the barn and moved on with life. 2016 drove from Tampa to northern WI to pick it up and to hopefully breathe life back into it. Today she sits in my back yard in Japan and I am currently making a parts list. You guys are awesome and...
Does anybody have any insight on this headlight design? I am really interested on how sleek it looks and would like to put it on my 81 CM400. If so please let me know before I try to cut a hole in mine jk I do believe it is too shallow of a housing to fit a gauge as well.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.