Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
We noticed you are blocking ads. DO THE TON only works with community supporters. Most are active members of the site with small businesses. Please consider disabling your ad blocking tool and checking out the businesses that help keep our site up and free.
Awesome, thanks for the suggestions. I hadn't thought about file marks but now that you mention it if there was rubbing those would probably be much smoother.
I have a friend with a compression tester so I'll do that check this weekend. Do you have any suggestions on what type of oil to use...
I also forgot to mention last night that I did check the breather tube and it was clogged so hopefully that was the cause of my leak and there is no permanent damage to the seals. No matter what happens with this motor I need to get a set of VM30s so I'll just fire this thing up and see what it...
Got my work space sorted out a bit, I'm really excited about this:
How did I make it this far in life without an impact driver? Getting those stubborn side cover screws out is a snap with this thing, it's my new favorite tool!
The clutch was sticking and there was no oil on the dipstick so...
Back from the grave! So happy I was able to find this post and that the pictures are still here, I forgot all the details of what I did back then.
Things are a little hazy that far back but after my last update in 2008 I did get the bike on the road and rode it through the spring and summer of...
I got all the parts for my front end last week and put it together, it looks really nice. The triple clamps and tubes from the 500 are way stronger than what was on the 350 originally, plus the disc brake is sweet. I was relieved to find that my tapered bearings fit the 500 triple tree so its...
Well they sent me the wrong intake manifolds so I have to wait a couple weeks for that to get sorted out. In the meantime I picked up a 500 twin front fork and wheel as well as some 35mm clipons. Hopefully the tapered bearings from my 350 front end will fit.
I still have some charging...
Thanks for the offer Chris but by the time I find calipers and the rest of the parts for those forks I could just find a heavier setup. If they were heavier than 33mm I'd take you up on it for sure.
Well it's been a long time since I posted an update so I guess it's time to get you guys up to speed. I got really busy with school and the weather has not been cooperative so I haven't spent much time on the bike.
I got the bike running and ridable, the Mikuni carbs work way better than the...
I don't see how the head design implies incompatibility. As long as the drive ratio from the crank to the cams is correct and the chain is properly tensioned it should work. Problem is if the studs fit the cylinders and if the head will fit in the frame.
Does anyone have the cylinders out of...
I have heard that Honda 360 cylinders will fit on a 350 engine. I have also seen people put 450 pistons in a 360 engine. So my questions is this, how far can you bore the 360 cylinders and will they actually fit on the 350 engine? Is there any difference aside from bore between the 350 and...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.