Recent content by T.Stanley

Sorry for the late post. Here is a new video with the Lifan 200cc motor. I used a Keihin PZ30 Carb with 112 main jets. https://youtu.be/PqUYzoWrZkM

Re: Honda XR650L "El Conquistador" Thank you. I am waiting for some titanium bolts so I can finish up and mount my Brembo caliper. Will post pictures this weekend and possibly a video.

Thank you, Sir. Bike is almost finished. Just fine tuning it and fabricating a bracket for a gold Brembo Caliper off a KTM 625 SMC. Will post pictures soon.

I still have about 3/4in gap between the tire and the chain.

500/530 -18 TR6 Tube from Bikemaster on Amazon.

Re: Honda XR650L "El Conquistador" Thanks Jeff. It was handmade out of aluminum by my buddy Evan @Iron Cobras Fabrication in Long Beach, CA.

Test fitting my freshly painted front fender to a RSW fork brace. Paint color is a blueish-grey. I chose this paint color when I was out for brunch with some friends one weekend. Noticed a Benjamin Moore paint store nearby, walked in to grab some color samples, and my buddies thought this color...

New Sprockets New Rear Rotor New Swingarm Needle Bearings New Honda Chain Adjusters Ebay Rear Brake Reservoir Refinished/Rebuilt Rear Master EBC 320mm Supermoto Rotor Works Performance Custom Shock

My attempt at shaving my seat foam. It may be unconventional but it works for me. I ordered a 3 inch thick high density foam block on Amazon and glued it on the seat pan using 3M spray adhesive. Then borrowed my wife's Wusthof bread knife from the kitchen and hacked away. After 30 mins, I had a...

Thank you, sir. Loving your build too.

- ALL Balls Racing Stem Bearings - Motor Rebuilt and Painted - Custom Work Performance Shock (internally shortend 1/2 inch and re-valved to street bike specs)

- Front forks rebuilt with Eiback .47kg springs, All Balls Seals, Delrin Spacers, and Racetech Gold Valve Emulators

- Frame and Battery Box powdercoated Battleship Grey - Swingarm and Fork Cases powdercoated Stardust Silver

I'm back!! It's been a while since I've worked on the bike. I recently moved so it took a little while to unpack everything and set up shop in the garage again. Here's where the project stands: - Checked specs for rockers, cams, piston, rings, etc. - Repainted Jug, Head, and Lower Case

Few different ways for the front end conversion. 1. Emig Stem Conversion Kit - http://www.emigracing.com/xr650lcrf.html Expensive but looks great! 2. Emig Replacement Stem - http://www.emigracing.com/steering-stems.html Link to someone whom has done it -...