Recent content by The Last V8 Interceptor

If there is, it would have to be on the motor side. I replaced the oil filter bolt with a new one.

I recently bought a set of stainless allen bolts for my '75 cb750 Super Sport. I just changed the gasket on the alternator cover a few days ago, and when taking out the original bolts I noticed the previous owner had used lock-tite or some similar blue substance. I have always heard it is...

I changed both o-rings, and put a little oil on each.

Hello, a few months ago I changed the oil/filter on my '75 cb750 Super Sport and, after learning about the washer that goes between the housing and the spring (which everyone seems to lose and most bikes I've worked on never have them) I decided to put a similar sized washer in there. However...

Thanks! I've heard people using all kinds of stuff to get the old liners out. Nails, screws, etc. Will hopefully get to it by the end of the week.

I was looking at tanks last night. The chemicals are pretty expensive. However, most of the ones I see on ebay for a 1972 cb350 look worse than mine. If I see one decent enough, that's definitely the route I'd rather take.

I was just about to ask this same question. I assume it'd be wise to rinse the tank after using the methyl ethyl ketone? Especially if the tank is to be resealed.

Hello, haven't been on a board in a while, so here goes.... I'm a 27 year old human from FL. I recently moved back from Ohio (don't ask). I've ridden dirt bikes most my life. Been getting into touring bikes over the past few years. Always stayed away from road bikes while living in South FL...