Recent content by Turnturtle

Clutch body, rollers, springs and spring caps look to be in good shape. You could pick it up as I am local to you. Shoot me a PM.

I'll take a look on my parts motor and let you know.

https://www.ebay.com/itm/AMAL-BELLMOUTH-AIR-INTAKE-WITH-GAUZE-376-MONOBLOC-600-CONCENTRIC-CARBURETTOR-/223528637135?_ul=IN Here’s one for £24.

Try this one available at Mouser Electronics https://www.mouser.com/datasheet/2/57/Bulgin_12mm_Switches-1600823.pdf

$12,700~ per hour.......Nice. Ouch! Any way to put a surge protector on the input to prevent it from happening again?

I took ohm readings across the wires of one of my coils. Pink to yellow: 2.0, pink to white:1.4, white to yellow: 2.5. The meter was set to its most accurate setting. I would PM Matt for a definitive answer however.

https://images.triumphmotorcycles.co.uk/media-library/images/motorcycles/roadsters-supersports/my21/pb1%20speed%20triple/family%20page%20images/speed-triple-family-promo-955x537.jpg

Check out Mikes XS for rims. https://www.mikesxs.net/tires-and-wheels/wheel.html

Here's one that was made in NZ: https://www.bikeexif.com/motorcycle-with-car-engine

https://www.ebay.com/itm/203346342795?mkevt=1&mkcid=1&mkrid=711-53200-19255-0&campid=5338464574&toolid=11200&customid=SI_benchmaster%20milling%20machine%7Cbenchmaster%20milling%20machine%7Cbenchmaster%20milling%20machine currently at $660. Bid ends at 12:16 cdt

How about a banjo bolt with a switch, like this:

BOTM...........

I'd like to nominate johnu's Triumph tr5mx. It looks like it's done!

If you haven't already, take a look at the solar car design reference material, https://www.americansolarchallenge.org/regulations/solar-car-design-reference-material/ . The math in there is way above my pay grade but it may be of use to you.

Or you could etch it like Trek97 or Irk. I'm sure your son has some design he'd like to add.