Recent content by yonson88

The motor is a 1974 CB200 just has 175 pipes on it. Here is an updated photo!

For anyone reading. I did the switch and the bike rides very nicely got up to 68 mph at ease but did feel the bike saying it wasnt getting much faster.

Hello All, I am working on a long project, and am now running stock headers and aftermarket mufflers on my 1974 CB200. It runs real nice but I am wanting to finish putting it back to its original look. I picked up a 1969 CB175 parts bike for very cheap with excellent exhaust, headers and...

Ok, I am now able to get to 50 mph, havnt had it on a long enough strait-away to get any faster. The issue was the Automatic Timing advancer. Thank you Teazer, I had misunderstood you previously thinking you meant the spring action on the points itself. I believe a nice carb adjustment will have...

Did you ever resolve your issue? One thing I found while fighting the same issue was that the carb slides are actually side specific. Try swapping those out and see what happens.. Also behind the points plate there is the spark advancer, make sure that is free to rotate and spring back to...

Thank you mark. I am going to try a few other things before changing the jets. Very good info to know tho. Deepwaterimports: The sprockets are stock, and clutch is perfect, engine itself only has 120 original miles and new rings put in. ACM177: The last time I tried got it to 8000 slowly...

The intake is stock and the exhaust is aftermarket. The company told me that no re-jetting would be needed on changing over to there brand. But no way to tell as I bought the bike originally with no mufflers just headers.. Where is the best place to find new jets, also would I be wanting to go...

Hello All, I have been working on a 1975 CB200T for a while now, cleaning and trying to get it running correctly. I finally have made it to the point where both sides are running evenly and starts easily. The issue that I am having is I cannot get the bike to get over the 30mph mark. It seams to...

You ever find your piston rings? I have a few extra sets labeled 13011-354-003. For 1974-1976 CB200. Let me know. Thank you,

Ok, so I talked to a few motorcycle experts and one told me to open the tappets to a gap of .015 rather then .002, not to run on but just for the compression test to be sure the valves were closing all the way. After doing this the compression stayed the same 80. I tracked down another...

So cheap? lol Let me know. Really just need them to hold the covers on. Thank you.

What bike do you have for sale? How much?

How much for the air filter assemblies? Shipped to Michigan?

Thank you, Your help is much appreciated!!

I know that they cleaned the cylinders, did not bore out, wouldn't that mean you would have to go to over-sized rings? I planned to have it honed but they didnt have one that small. Did it by hand, cleaned it up real good. I will check valves, make sure they are seating correctly, we did do a...