Recent content by zoombyu

well disregard that, Im pretty sure im missing the axle spacer that goes between the long spacer and the bigger bearing. I think it sits on top of the spacer and slides in the bigger bearing.

I recently installed new bearings on my hubs, the front went in with no problems. but I am unsure of the rears. I know it changes sound when it seats fully but im not quite hearing that and ive pounded the hell out of both sides and they don't seem to be going down anymore. This was after...

Here is my 500...

Looking for a better looking set of gauges and found some 550s on CL I know quite a bit is interchangeable but the gauges between the two have different readings. My 73 500 only reads out to 120 and the 550 reads out to 140. The tach looks similar, redlined in the same range but mine has a 12k...

in for front fender if parting out

I am from Toledo and am looking for a "local" person or shop to help me out with my 73 Honda cb500FOUR. Any suggestions would be appreciated. I frequent Holland/Swanton/Liberty Center so you might not be too far